Parkside 353556 2010 Operation And Safety Notes page 25

distance measuring reference point
.
25
- Should the measurement lie outside
the measurement range, "Err" or an
illogical number appears on the dis-
play
lies between 0.175 m and 20 m.
- Make sure that there is no "Err"
message shown on the display before
any measurement. "Err" message
can always be cleared by pressing
the MODE button
"Err" message still exists, press the
MODE button
the "Err" message is cleared from
the display
- Hold the product upright towards
the wall to which you wish to meas-
ure the distance. The laser receiver
must be at a right-angle to the wall.
For this, make use of the vial. The
bubble in the vial
tween the marked lines.
2. Briefly press the MEAS button
laser beam will turn on. The laser on
. The measurement range
2
10
.
2
briefly. If
10
repeatedly until
must stand be-
8
16
. The
6
GB 25