D-Link DIR-819 User Manual page 94

Section 3 - Configuration
If you selected Block Some Access, configure the following options:
Enable: Check the box to enable this rule.
Name: Enter a name for port filtering rule.
Dest IP Start: Enter the start of the IP address range to filter.
Dest IP End:
Enter the end of the IP address range to filter.
Protocol: Select the protocol to apply the port filter to. The options are Any,
ICMP, TCP, and UDP.
If you select TCP or UDP, enter the port range:
Des Port Start:
Enter the start of the port range to filter.
Des Port End:
Enter the end of the port range to filter.
Click Next to continue.
STEP 6: CONFIGURE WEB ACCESS LOGGING
Web Access Enable or disable Web Access logging. You may view the web access
log from the Status > Logs section of the web configuration utility.
Logging:
Click Save to finish.
D-Link DIR-819 User Manual
Add Policy (continued)
STEP 5: PORT FILTER STEP 5: PORT FILTER
Add Port Filters Rules.
Specify rules to prohibit access to specific IP addresses and ports.
Enable Name Dest IP Start Dest IP End
☑
0.0.0.0 255.255.255.255
☑
0.0.0.0 255.255.255.255
☑
0.0.0.0 255.255.255.255
☑
0.0.0.0 255.255.255.255
☑
0.0.0.0 255.255.255.255
☑
0.0.0.0 255.255.255.255
☑
0.0.0.0 255.255.255.255
☑
0.0.0.0 255.255.255.255
Prev Next Save
STEP 6: CONFIGURE WEB ACCESS LOGGING
Select the method for filtering.
Web Access Logging : ž Disabled
š Enabled
Prev Next Save
Protocol Dest Port Start Dest Port End
Any ▼ 1 65535
Any ▼ 1 65535
Any ▼ 1 65535
Any ▼ 1 65535
Any 1 65535
▼
Any ▼ 1 65535
Any ▼ 1 65535
Any ▼ 1 65535
Cancel
Cancel
90