Sealey SAC7000.V2 Manual page 6

WINDOW SEALING KIT FOR AIR CONDITIONER DUCTING
MODEL NO:
10. SAFETY
DO NOT cover the unit with this material, and do not obstruct the air inlet and outlet grilles of the machine with items such as
8
clothing,soft furnishings, furniture, bedding etc.
DO NOT use the material for any purpose other than that for which it is designed.
8
DO NOT use in bathroom or shower room.
8
DO NOT allow children to use, when not in use,store in a safe, cool, dry, childproof area.
8
NOTE: This material is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or
lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a
person responsible for their safety. Children should be supervised to ensure that they do not play with this material.
11. INTRODUCTION
Suitable for all types of hinged windows including skylights up to 300cm total perimeter. Easy to install using the supplied roll of self-
adhesive hook & loop tape. Double zip makes positioning the ducting at any height easy. Saves energy by making the air conditioner
or dryer more effective.
12. CONTENTS
Window seal
Velcro tape
13. INSTRUCTIONS
13.1. CLEANING
Clean the window and window frame, making them free from grease and dust.
13.2. CUTTING THE VELCRO TAPE TO SIZE
Cut the Velcro tape to size, using a pair of scissors. Mark the middle (M) of the window seal (Fig. 1). Mark the middle of the window
frame and the casement (Fig. 2-4) ( Figure 2 shows an open window, Figure 3 a tilted window and Figure 4 an open skylight).
13.3. VELCRO TAPE TO THE WINDOW FRAME
Adhere the Velcro tape to the window frame around the window. Then adhere the Velcro tape fully around the window. Stick the Velcro
tape to the front side (in most cases 1 cm wide) of the casement or to the inner surface of the casement (where the window handle is
attached).
CAUTION: DO NOT adhere the Velcro tape on the window.
13.4. SEALING WINDOW TO WINDOW FRAME
Adhere the narrow side of the window seal to the Velcro tape on the window frame. Work from the centre and fully adhere the
narrow side all the way around. First fasten side A, then side B, starting in the middle and working all the way to the left and right.
IMPORTANT! When fastening, point A must be exactly opposite point B.
13.5. SEALING THE WINDOW
Leave the window ajar and adhere the wide side of the window seal to the Velcro tape of the window.
CAUTION: Leave sufficient space, so that the window seal will not get jammed
13.6. OPENING THE WINDOW SEAL
Open the zip of the window seal approximately 50 cm. Open the zip preferably at the positions marked with "S" and attach the exhaust
air hose.
13.7. ATTACHING THE AIR DISCHARGE
Insert the air discharge hose of the air conditioning system through the hole in the window seal and close the zip until the air discharge
hose is properly secured
13.8. CLOSING THE WINDOW
If you want to close your window, simply detach the cloth from the Velcro tape. When closing the window take care that the seal is not
jammed between the casement and window frame.
NOTE: This window seal ensures that the room remains cool for a longer period of time and keeps insects and mosquitoes out.
© Jack Sealey Limited
SACWK1
Window seal with zip
Original Language Version
Velcro tape
SAC7000.V2, SCS9002.V3,SACWK1 Issue 1 05/01/23