Fitting instructions power chisel
angle grinder extension arm (2 pages)
Summary of Contents for Arbortech MIN.FG.900.00
Page 1
MULTI PURPOSE TOOL MINI CARVER MIN.FG.900.00, MIN.FG.900.40 MINI GRINDER TRADE MIN.FG.910.00, MIN.FG.910.40 OWNER’S INSTRUCTION MANUAL Double Insulation used throughout, no provision for earthing.
If operating a power tool in a damp location GENERAL POWER TOOL is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces SAFETY WARNINGS the risk of electric shock. 3) PERSONAL SAFETY WARNING - READ ALL a.
Page 7
d. Store idle power tools out of the reach of least equal to the maximum speed marked on the power tool. Accessories running faster than children and do not allow persons unfamiliar their rated speed can break and fly apart. with the power tool or these instructions to operate the power tool.
accessory could snag your clothing, pulling the SAFETY WARNINGS SPECIFIC FOR accessory into your body. GRINDING OPERATIONS: n. Regularly clean the power tool’s air vents. The a. Use only wheel types that are recommended for motor’s fan will draw the dust inside the housing your power tool and the specific guard designed and excessive accumulation of powdered metal for the selected wheel.
-The Restriction of the Use of Certain Hazardous Ensure that the clamping screw (18) is always fully Substances in Electrical and Electronic Equipment tightened before use. Regulations 2012 Technical file at: Arbortech Ltd, 67 Westchester Road, Malaga, WA 6090, Australia PRODUCT FEATURES AND LIST OF COMPONENTS ITEM...
(18) using the Allen Key OPERATION provided with the tool (Fig. D). Replace the blade with other Arbortech recommended product as shown on the following diagrams. Always use two hands to operate the Mini Carver/Mini Grinder Trade placing the left hand on the auxiliary Place the new disc over the small pulley, ensuring it is handle and the right on the tool body ( Fig.
MAINTENANCE STARTING OPERATION Observe correct mains voltage! The voltage of the power source must agree with the voltage specified WARNING: BEFORE ANY on the nameplate of the machine. Power tools marked ADJUSTMENT, CLEANING OR with 230-240V can also be operated with 220 V. WORK ON THE MACHINE ITSELF, DISCONNECT FROM THE POWER SHOWING ANGLE &...
Page 12
**Note: Specifications may differ from country to country. NOTE: Motor may differ from that shown on box depending on specifications required for your country. ARBORTECH PTY LTD 67 WESTCHESTER ROAD MALAGA 6090 PERTH WESTERN AUSTRALIA Tel: 08 9249 1944 Fax: 08 9249 2936 U.S.A.
Need help?
Do you have a question about the MIN.FG.900.00 and is the answer not in the manual?
Questions and answers