Assign The User Code (Assigned Use Only); Operating Instructions - In Assigned Use Functionality; Operate With A Manager Key - Hafele Axis 231.98.320 Operating Instructions Manual

5.4 Assign the User Code (assigned use only)

Once a user credential is assigned, the previously assigned user credential will no longer
operate the lock.
Default user code:
Ⓒ ⚿
1. Press then insert a registered Manager
key.

The LED will turn on.

6. Operating Instructions - In Assigned Use Functionality

In assigned use functionality, users unlock their assigned locker with their 4-digit User Code.
To reassign a locker to a different user, follow instructions to 5.4 Assign the User Code
(assigned use only).

6.1 Operate with a Manager Key

To unlock:
Insert a registered Manager Key.
To relock:
Close the door.
① ② ③ ④. Ⓒ
2. Press [new 4-digit code]

A two-tone beep will be heard.
Ⓒ
3. Press [the same 4-digit code]

Two sets of two-tone beeps will be heard
and the LED will turn off.
⚿.
⚿.
17