Key Insertion; Setup - Hafele Axis 231.98.320 Operating Instructions Manual

3. Key Insertion

Next logo must face up on standard and vertical body locks.

4. Setup

Locks are shipped with factory default settings (only operates by pressing
be completed to register the Programming Key and Manager Keys to all the locks.
1. Insert the Programming Key.

A two-tone beep will be heard and the LED
will turn on.
3. Insert the Programming Key.

A two-tone beep will be heard and the LED
will turn off.
2. Insert one Manager Key at a time.

A two-tone beep will be heard for each
Manager Key registered.
4. Repeat above steps for each lock or follow
instructions to 5.1 Express Register Manager
Keys to setup all locks.
Ⓒ ⚿
). Setup must
13