Replace Keys - Hafele Axis 231.98.320 Operating Instructions Manual

5.3 Replace Keys

Replacement keys must be purchased and registered to the locks to prevent the lost/stolen
keys from operating a lock.
To replace the Programming Key
1. Note the order number (found on the lock's rear
unit).
To replace the Manager Keys
1. Collect all remaining Manager Keys.
3. Insert the Programming Key.

A two-tone beep will be heard and the LED
will turn on.
16
2. Contact Hafele Support to purchase a
replacement Programming Key.
2. Go to any lock operated by the Manager Keys.
Ⓒ ⚿ ⑤ ⑤ ⚿
Press
4. Insert the Programming Key again.

Three sets of two-tone beeps will be heard
and the LED will turn off. All previously
registered Manager Keys are erased.
Follow instructions to 5.2 Add Manager Keys to
register the remaining Manager Keys to the locks.
.