Sun System Pro Sun 2 1000W 208-240 V Installation And Operating Instructions Manual

INSTALLATION AND OPERATING INSTRUCTIONS
1 INTRODUCTION
Thank you for purchasing the Sun System® Pro Sun 2 1000W 208-240 V. This manual describes the mounting and installing of the product and also
describes how to use the product. Please read and understand this manual completely before using the product. Only use the product as specified
in this manual.
1.1 USED SYMBOLS
Warning! A warning indicates severe damage to the user and/or product may occur when a procedure is not carried out as described.
Caution! A caution sign indicates problems may occur if a procedure is not carried out as described. It may also serve as a reminder to the user.
Note: A note gives additional information, e.g. for a procedure.
This symbol indicates that the reflector and lamp can reach very high temperatures (>85 °Celsius / >185 °Fahrenheit).
Observe a cool down period before performing maintenance.
This symbol is an internationally recognized symbol used to designate recyclable materials.
This symbol is an authorized use mark employed on electronic products manufactured or sold in the United States which indicates that the
electromagnetic interference from the device is under limits published by the Federal Communications Commission. The FCC logo is a mark that
declares that the equipment is authorized to market and operate under the FCC's SDOC procedure.
This symbol shows that a product has been independently tested and certified to meet recognized standards for safety.
The symbol on the material, accessories or packaging indicates that this product may not be discarded as household waste. By disposing of the
equipment in the proper way, you will be helping to prevent possible risks to the environment and public health, which might otherwise be caused by
improper handling of the discarded equipment. Recycling of materials contributes to the conservation of natural resources. Therefore, please do not
dispose of your old electronics and electrical appliances via household waste.
This symbol indicates the minimum distance (B) between the fixture (A) and the lit surface.
Instructions for the intended installation environment (damp locations).
These photo biological safety markings are based on testing of the light output characteristics of a single horticultural luminaire. Increased exposure
risk to facility personnel may be present depending upon the number of horticultural luminaires and their placement and/or positioning within the
plant growth facility. It is the responsibility of the plant growth facility to address these risks at the facility level and to ensure that people entering the
plant growth areas while the lights are on, are aware of these risks and that appropriate safeguards are in place.
WARNING - POSSIBLE RISK OF INJURY TO EYES AND SKIN
• Hazardous optical radiation may be emitted from the light source. Do not stare at operating
lamp. May be harmful to the eyes.
• UV may be emitted from the light source. Eye or skin irritation may result from exposure.
• Use appropriate shielding.
• IR may be emitted from the light source. Do not stare at operating lamp.
AVERTISSEMENT – RISQUE POSSIBLE DE BLESSURES OCULAIRES ET CUTANÉES
• La source d'éclairage peut émettre un rayonnement optique dangereux. Ne pas regarder
fixement la lampe en fonction. Peut être néfaste pour les yeux.
• Des rayons UV peuvent être émis par la source d'éclairage. L'exposition peut provoquer une
irritation oculaire ou cutanée.
• Utiliser un écran adéquat.
• Un rayonnement infrarouge (IR) peut être émis de la source d'éclairage. Ne pas regarder
fixement la lampe en fonction.
Pro Sun 2
1000W 208-240 V