Basic Functions - Philips AZ-2030 User Manual

BASIC FUNCTIONS

Switching on and off
• Adjust the POWER slider to the desired sound source:
CD, TUNER or TAPE.
™ During playback, the PLAY 2;, STOP 9 and
PRESET 4, 3 buttons on the set light up
• The set is switched off when the POWER slider is in the
TAPE/OFF position and the keys on the tape deck are released.
™ The volume, tone, sound settings and tuner presets will be
retained in the set's memory.
PHILIPS demo mode
1. On the set, press the CD STOP 9 button for 5 seconds.
™ PH..IL ..IPS scrolls across the display continuously in the demo
mode.
2. To return to the current display you can either:
• press any function button on the front panel. This interrupts the
demo mode for 30 seconds;
• press the CD STOP 9 button for 5 seconds. PH..IL ..IPS scrolls
across the display once before the demo mode is cancelled.
Adjusting volume and sound
1. Turn the VOLUME control clockwise to increase or anti-
clockwise to decrease volume on the set (for AZ2035 model
only: or press VOLUME 3 or 4 on the remote control).
™ Display shows the volume level VOL and a number from 0-32.
2. Press ULTRABASS once or more to switch on or off.
™ If on, indicator 1 lights up. Press again if you want extra bass
and indicator 2 lights up.
3. To adjust the treble tone level, press ULTRA HIGH CLARITY
once or more to switch on or off.
™ If on, the indicator lights up.
4. Press INCREDIBLE SURROUND once or more to switch the
surround sound effect on or off.
™ If on, the indicator lights up.
Note: The effect of INCREDIBLE SURROUND may vary with
different types of music.
10
BATT
LOW
AZ 2030-2035/17
AZ 2030-2035/17
AZ 2030-2035/17