Table 1-5: Nominal Traits - Triggering System - Tektronix TDS 520B Service Manual

Table 1–5: Nominal Traits — Triggering System
Name
Range, Delayed Trigger Time Delay
Range, Events Delay
Range (Time) for Pulse-Glitch,
Pulse-Width, Time-Qualified Runt, Timeout,
or Slew Rate Trigger, Delta Time
Setup and Hold for et a Hol o
Ra ges Ranges,
TimeSetup/Hold Violation Trigger ime et Hol iolatio
Ranges, Trigger Level or Threshold
Video Trigger Modes of Operation
(Option 05 Video Trigger)
TDS 500B, 600B and TDS 700A Service Manual
Description
16 ns to 250 s
TDS 600B; 2 to 10,000,000
TDS 500B/700A: 1 to 10,000,000
1 ns to 1 s
Feature
igge
Setup Time
Hold Time
Setup + Hold Time
For Setup Time, positive numbers mean a data transition before the clock edge and
negative means a transition after the clock edge.
For Hold Time, positive numbers mean a data transition after the clock edge and negative
means a transition before the clock edge.
Setup + Hold Time is the algebraic sum of the Setup Time and the Hold Time
programmed by the user.
Source
Any Channel
Auxiliary
Line
Supports the following video standards:
NTSC (525/60) – 2 field mono or 4 field
PAL (625/50) – 2 field mono or SECAM, 8 field
HDTV –
(787.5/60)
(1050/60)
(1125/60)
(1250/60)
FlexFormat
User can specify: field rate, number of lines, sync pulse width and polarity, line rate,
and vertical interval timing.
TM
(user definable standards)
Nominal Traits
Min to max
–100 ns to 100 ns
–1 ns to 100 ns
2 ns
Range
12 divisions from center of screen
8 V
400 V
1–11