Source Settings - Hall Technologies HT-HV75-IFP User Manual

SOURCE SETTINGS

UI Element
Video Quality
Audio Settings
Auto select source on
connection
Auto select when no signal
Rename Source
Source When Power On
Source Lock
No signal Auto Shutdown
HDMI EDID
CEC for Automatic Startup
CEC for Automatic
Shutdown
Hall Technologies June 2, 2023
Description
Opens a menu for adjusting picture quality and color temperature:
•
Picture Mode: user can adjust Brightness, Saturation, Contrast, and Sharpness
•
Color Temperature: user can adjust to preset temperatures of Standard, Warm and
Cool
Volume, channel balance, bass, and treble controls. (See next section for more detail.)
Provides two options for when a source is connected:
•
Auto Jump: automatically switches to the newly connected source.
•
Pop-up Prompt: opens a prompt asking if user would like to change to the newly
connected source.
When enabled, the source will automatically switch to Android when there is no signal on
any of the other inputs.
Allows user to change the names of each of the sources.
Changes the input to the designated source when the panel powers on.
Locks a designated source.
Shuts down the panel when there is no signal on a source input. (Does not automatically
shut down when on the Android home page.)
Select between HDMI EDID 1.4 or EDID 2.0.
When enabled, the IFP automatically starts up when an HDMI source turns on.
When enabled, the IFP automatically shuts down when an HDMI source shuts down.
Page 15 of 34