Basic Operations - Startup / Standby; Startup; Standby - Hall Technologies HT-HV75-IFP User Manual

Basic Operations – Startup / Standby

STARTUP

Step Illustration / Button
1
2
3

STANDBY

• If there is no source input detected within 15 minutes, the panel will automatically into standby
mode
• Exception:
o If the panel is in the main Android interface, even if there is no source input detected for
15 minutes, the panel will not enter into standby mode
• Before the panel enters standby mode, the Hall Vision panel will save the picture and sound
settings. Upon restart these settings will be used.
Hall Technologies June 2, 2023
Description
Plug in the included power cord to a 100-240V AC power receptacle
Flip on the power switch, located on the bottom of the panel. With this switch set to
"ON" the panel can be powered up fully or go into standby mode.
Click on power button located on the front of the panel
Click on the power button located on the remote control
Page 12 of 34