1. Position the Laser TV so it is parallel with the screen
surface. We recommend the distance from the back panel of
the Laser TV to the wall to be 8 1/8 inches.
2. Plug the power cord into a wall outlet.
3. Remove the lens cover. Press the POWER button to turn on
the Laser TV.
Power Cord
WARNING: Insufficient ventilation space will cause this
device to overheat or become damaged.
• Do not block the air vents or place any object on this device.
• Do not place this device in any narrow, enclosed or poorly
ventilated space.
Laser beam
At a minimum, leave the amount of space shown in the diagram
below for this device to have proper ventilation.
20 cm
8
10 cm
20 cm