Basic Functions; Playing A Disc; Pause; Display Information - Philips EXP511 User Manual

EXP511,513/00c.1 eng 1/3/02

Basic functions

Playing a disc

With this set you can play
– all pre-recorded audio CDs
– all finalized audio CDRs and CDRWs
– MP3-CDs (CD-ROMs with MP3 files)
Push the OPEN 2 slider to open the
1
CD lid.
2
Insert a disc, printed side up, by pressing
gently on the disc´s centre so that it fits onto
the hub. Close the lid by pressing it down.
Press 2; to start playback.
3
Reading CD is displayed. Playback starts.
The track type (CD or MP3), the current
track number and the elapsed playing time
are displayed. For an MP3 track, the album
number is also displayed and the filename
is scrolled twice.
Press 9 to stop playback.
4
The total number of tracks, the track
types (CD, MP3), the number of albums on
an MP3-CD and the total playing time
(of an audio disc only) are displayed.
5
To remove the disc, hold it by its edge and
press the hub gently while lifting the disc.
Notes:
After pressing 2; it may take some time until the first MP3 track is played.
5 seconds after pressing 9 the set switches off automatically.
16
15:11 Page 16

Pause

Press 2; to interrupt playback.
1
The time where playback was interrupted
blinks.
To resume playback press 2; again.
2
Display information (for MP3 tracks only)
1
Press DISPLAY repeatedly during playback to
select the information to be displayed:
– Filename: the track´s file name,
– Album: the album´s folder name,
– Artist: the artist´s name (if this ID3 tag
information is available),
– Title: the track´s title (if this ID3 tag
information is available),
– the track type and the elapsed playing time.
2
The selected information is scrolled twice.The
album number and track number are displayed.
Note:The ID3 tag is part of an MP3 file and contains various track information
such as the track´s title or the artist´s name. Complete the ID3 tag information
with your MP3 encoder software before burning the MP3-CD.
Basic functions
17