Panasonic WH-ADC0309K6E5 Operating Instructions Manual page 49

Air-to-water hydromodule + tank
Hide thumbs Also See for WH-ADC0309K6E5:
Table of Contents

Advertisement

Maintenance
FILLING THE CIRCUIT SYSTEM
If the pressure is too low in the CIRCUIT system, it needs to be topped up. See the Installer Manual for more information.
VENTING THE CIRCUIT SYSTEM
In event of repeated fi lling of the CIRCUIT system, or if bubbling sounds are heard from the indoor module, the system may
need venting. This is done as follows:
1. Turn off the power supply to the indoor module.
2. Vent the indoor module via the vent valves and the rest of the climate system via the relevant vent valves.
3. Keep topping up and venting until all air has been removed and the pressure is correct.
The climate system may require topping up after venting.
User
• In order to ensure optimal performance of the units, user may inspect and clear any obstruction on the air inlet and outlet
vents of the outdoor unit.
• Users should not try to service or replace parts of the unit.
• Contact authorised dealer for scheduled inspection.
Dealer
• In order to ensure safety and optimal performance of the units, seasonal inspections on the units, functional check of
RCCB/ELCB, fi eld wiring and piping have to be carried out at regular intervals by authorised dealer.
• Specifi c to the Sanitary Water Tank, it is important to service the Water Filter Set periodically.
49

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents