AEG DVD 4556 LCD Instruction Manual page 48

English
48
Main Menu Overview
General Setup Page
DVD4556LCD_IM
Slide Control
Please use the control as follows:
1. Select it with the ENTER button.
2. Navigate the control with the navigation buttons ( / ).
3. Confirm with the ENTER button.
■
General Setup (1)
■
Audio Setup Page (2)
■
Video Setup Page (3)
■
Preference Page (4)
■
Password Setup Page (5)
NOTE:
Some menu settings are available in stop mode only (contingent on DVD).
TV Display
Here you may adjust the output of the DVD-Player to match the aspect ration of
your display device.
Background: Unless you have a wide-screen TV, the aspect ratio of your image
display is 4:3. Most movies however, have an aspect ratio of 16:9, therefore the
picture is to wide for TV playback.
You may select here how the playback of the movie will appear on your output
device:
■
4:3 Panscan: You may only view the centre area of the movie. The edges are
cut off.
■
4:3 Letterbox: You may view the entire range of the movie in a reduced
version; therefore a black bar appears on the top and bottom of the screen.
■
16:9: Choose this option if you have a wide-screen TV. Keep in mind that
movies recorded in an aspect ratio of 4:3 will display in the same 4:3 ratio.
Therefore it will not populate the entire screen of the wide-screen TV.
■
Wide Squeeze: Select this option, if you are using a wide screen TV for
playback. This setting adjusts films in 4:3 format to the aspect ratio of the
wide screen TV.
NOTE:
The setting "4:3 PANSCAN" is not supported by all DVDs.
Angle Mark (Camera Angle)
If the DVD contains scenes shot from different angles press the ANGLE button
(Fig. 3/21) to select one of the different camera angles. This function is only
available if the DVD contains scenes shot from different camera angles.
Activate the function as follows:
■
On: The angle mark is displayed.
■
Off: The angle mark is not displayed.
16.12.16