Kirkland Signature 10.0T - Rechargeable Hearing Aids Quick Start Guide

Table of Contents

Contents

1 Getting started
2 Initial pairing
3 How to operate hands-free phone calls
4 Troubleshooting tips
5 App to control your device
- 5.1 How to download
- 5.2 Functionalities
6 Documents / Resources
- 6.1 References
- 6.2 Download manual

Getting started

Charging

Place your hearing aid in the charger case

Defining the device for the left/right ear

blue indicator for left, red indicator for right

Indicator on the back of the hearing aid

Indicator on the speaker

Putting on the device

Place the hearing aid behind your ear
Insert the earpiece into your ear canal
If there is an anchor attached to the earpiece, tuck it into the bowl of your ear to secure your hearing aid

Initial pairing

On your device (e.g., a phone), ensure that Bluetooth wireless technology is enabled and search for Bluetooth enabled devices in the connectivity setting menu.
Switch on both hearing aids. You now have 3 minutes to pair your hearing aids with your device.
Your device shows a list of Bluetooth enabled devices. Select the hearing aid from the list to simultaneously pair both hearing aids. A beep confirms successful pairing.

The hearing aids can be connected to iPhone ® and Android™ smartphones.

After your hearing aids have been paired to your device, they will automatically connect again when switched on.

For more information about pairing instructions, go to: www.KS10userportal.com or check chapter 12 of your user guide.

How to operate hands-free phone calls

Making a call:
Enter the phone number and press the dial button. You will hear the dial tone through your hearing aids. Your hearing aids pick up your voice through the microphones.

Accepting a call:
Tapping the top of your ear twice or a short press on the upper or lower part of the multifunction button on the hearing aid (less than 2 seconds) or directly on your phone.

Ending & rejecting a call:
Tapping the top of your ear twice or a long press on the upper or lower part of the multifunction button on the hearing aid (more than 2 seconds) or directly on your phone.

Troubleshooting tips

Problem	What to do
The device not functioning	Clean speaker opening/earpiece Press lower part of multi-function button for 3 seconds Charge hearing aid
The device whistles	Insert hearing aid correctly Contact your ENT/GP or hearing care professional
The device too loud	Decrease volume if volume control available
The device not loud enough or distorted	Increase volume if volume control available Charge hearing aid Clean speaker opening/earpiece Contact your hearing care professional
The device plays two beeps	Charge hearing aid
The device will not switch on	Charge hearing aid Perform step 2 of the rebooting process
Indicator light on hearing aid does not light up when hearing aid placed in charging inserts	Insert hearing aid correctly into charger Connect charger to external power supply Wait three hours after placing hearing aid in charger, regardless of LED behavior