Kirkland Signature KS 10.0 Manual

TV listening

Initial setup to a TV or computer in your office:
Insert the power cable into a USB or power supply.
1
2 Insert the audio cable (Optical or Analog) into the TOSLink or
Headphone Audio Out jack.
"With KS 10.0, TV listening is easy and automatic, just like it should
be. All you'll need is this black connector that plugs into the back of
your TV."
TV listening, continued
3 Make sure the hearing aids are
on and within 3 feet of the
TV Connector.
Press the button on the back of
the TV Connector.
Audible connection confirmation
beeps are heard in the hearing
instruments.
4
Allow the member to experience the TV sound in stereo quality.
"How does the TV sound to you? You're hearing the sound in both ears,
in stereo. If you want more/less volume, you can use the buttons just
like we did with the phone call. You can even get up and walk around,
walk into the kitchen for a glass of water, and the sound will stay with
you. Any time you are in range (about 50 feet), you will automatically
be reconnected without having to push any buttons."
Let the member adjust the volume and walk around the room/office.
5
"Earlier you mentioned you would like to hear better on the phone
and/or the TV. Now that you've been able to experience the sound
quality of the hearing aids, in the normal Automatic program as
well as through your cell phone and TV, what do you think? I highly
recommend this hearing aid as a solution to help meet your hearing
goals. Do you agree?"
How to demo Kirkland
Signature 10.0 with Tcoil