Interface Specifications; Environmental Requirements - Watchguard XTM 1520 Hardware Manual

Interface Specifications

Network interfaces
XTM 1520
Network interfaces
XTM 1525
I/O interfaces

Environmental Requirements

To safely install your XTM 1500 Series device, we recommend that you:

Install it in a network rack

Put it in a secure area, such as a locked room, to keep the device from people who do not have
permission to use it

Connect it to a conditioned power supply to prevent damage from sudden power changes
Other environmental requirements:
Operating temperature
Operating relative humidity
Non-operating temperature
Non-operating relative humidity
Hardware Guide
 14x 1000Base-T, 100Base-TX, or 10 Base-T (10/100/1000Mbps), RJ45 connector
 6x 1000Base-T, 100Base-TX, or 10 Base-T (10/100/1000Mbps), RJ45 connector
 4x 10G/1G SFP+ fiber ports
Duplex LC connectors
o
10GBase-SR/SW or 1000Base-SX
o
850 nm multimode
o
Finisar FTLX8571D3BCV SFP+ modules included
o
 2 USB
 1 RJ45 Serial
0 – 40°C (32 – 104°F)
10% - 85% Non-condensing
–40 – 70°C (–40 – 158°F)
5% – 90% Non-condensing
Hardware Specifications
3