On/Off Timer Operation - Daikin CORA FTXM20QVMA Operation Manual

ON/OFF TIMER Operation

NOTE
Notes on TIMER operation
• When TIMER is set, the present time is not displayed.
• When using the ON/OFF TIMER to start/stop operation, the actual operation start/stop time may differ from the time set.
(Maximum of about 10 minutes)
In the following cases, set the timer again.
• After the circuit breaker has turned off.
• After a power failure.
• After replacing the batteries in the remote controller.
Timer functions are useful for automatically switching the air conditioner on or off
at night or in the morning. You can also use the ON TIMER and OFF TIMER
together.
[ON TIMER operation]
„ To set
• Check that the clock is correct.
If not, set the clock to the present time.
1.
Press
"
" " blinks.
• " " and day of the week disappear from the LCD.
2.
Press until the time setting reaches the
point you like.
• Each pressing of either button increases or decreases the time setting by 10 minutes.
Holding down either button changes the setting rapidly.
3.
Press
• " " and setting time appear on the LCD.
• The TIMER lamp lights orange.
Display
„ To cancel
Press .
• " " and setting time disappear from the LCD.
• " " and day of the week appear on the LCD.
• The TIMER lamp goes off.
Page 10
.
" appears on the LCD.
again.
Useful Functions
18