Kenmore 81714 Use & Care Manual page 13

CAUTION
DO NOT attach or remove handle or
wands while vacuum cleaner is ON. This
could cause sparking and damage the
electrical contacts or electronic controls.
ATTACHMENTS ON HANDLE
NOTE: If the PowerMate
YDFXXP FOHDQHU Rç EHfore removing handle
from wand.
1. Press wand release
button and pull up on
handle.
2. Slide attachments
oUPO\ RQ KDQGOH DV
needed. See
ATTACHMENT USE
TABLE (page 14).
Handle
Wand
Release
Pet
™
PowerMate
Floor
Brush
NOTE:
To remove Pet PowerMate
and/or pRRU brush, press the wand release
button and slide attachment out.
ATTACHMENTS
®
is attached, turn
Wand
Release
Crevice
Tool
Dusting
Brush
™
, dusting brush,
ATTACHMENTS ON WAND
1. To remove wand from
®
PowerMate , lock wand
in straight-up position.
2. Press wand release pedal with foot and
pull the wand straight up and out of
®
PowerMate .
3. Put attachments on wand as needed. All
except crevice tool will click into place.
See ATTACHMENT USE TABLE (page 15).
Tool
Release
Pet
™
PowerMate
Floor
Brush
NOTE:
To remove Pet PowerMate
and/or Fan Tool, press the tool release
button and slide attachment out.
- 13 -
Wand
Crevice
Tool
Dusting
Brush
™
, Dusting Brush,