Bass Blast; Setting The User Eq; Listening To Fm/Am Radio; Automatic Tuning - LG SR96TS-W Owner's Manual

28 Operation

Bass Blast

You can set the BASS BLAST sound mode
directly.
Press BASS BLAST repeatedly.
Display
BASS BLAST
BYPASS

Setting the USER EQ

You can listen to music with desired sound
effect by adjusting the BASS, MIDDLE and
TREBLE.
4
1. Press USER EQ on the front panel.
"USER EQ" appears on the display window.
2. Press PLAY / PAUSE on the front panel
while the "USER EQ" is displayed in the
display window.
3. Select the BASS, MIDDLE or TREBLE by
pressing ENTER on the front panel.
4. Rotate MULTI CONTROL on the front panel
to set sound level.
5. Press PLAY / PAUSE on the front panel to
finish the settings.
AR936TS-AH_DNGAFLX_ENG.indd 28
Description
During playback, reinforces
the bass sound.
You can enjoy the sound
without equalizer effect.
Listening to FM/AM
radio
You can listen to FM and AM broadcasts
through the built-in tuner. Before operation,
make sure you have connected the FM and AM
antennas to the unit. (Page 20)

Automatic tuning

1. Rotate INPUT SELECTION to select tuner
(FM or AM). Or press RADIO with the
remote control to select tuner (FM or AM).
2. Press TUNING - or TUNING + for more than
2 seconds.
Press TUNING - for more than 2 seconds to
scan from high to low.
Press TUNING + for more than 2 seconds to
scan from low to high.
The unit stops scanning whenever a station
is received.
In case of poor FM stereo reception
If the FM stereo reception is poor and "ST. "
flashes in the display window, select monaural
audio so that the sound will be less distorted
by pressing the MONO/STEREO.
The "ST. " indicator disappears in the display
window. There will be no stereo effect, but the
reception will improve. Press the button again
to restore the stereo effect.

Manual tuning

Press TUNING - or TUNING + briefly and
repeatedly on the FM or AM mode to select a
station you want. Or rotate MULTI CONTROL
on the unit.
2013-09-09 11:20:23