Advertisement
TECHNICAL DATA
Type
Battery voltage
Tool reception
No-load speed
Speed 1
Speed 2
Speed 3
Impact rate
Max. torque
Speed 1
Speed 2
Speed 3
Breakaway Torque
Max. diameter bolt / nut
Weight without battery pack
Noise Information
Measured values determined according to EN 62841. Typically, the
A-weighted noise levels of the tool are:
Sound pressure level / Uncertainty
Sound power level / Uncertainty
Wear ear protection!
Vibration Information
Vibration total values (triaxial vector sum) determined according to EN
62841.
Vibration emission value / Uncertainty
Impact tightening of fasteners of the maximum capacity of the tool
WARNING!
The declared vibration total values and the declared noise emission values given in this instruction manual have been measured in
accordance with a standardised test given in EN 62841 and may be used to compare one tool with another. They may be used for a
preliminary assessment of exposure.
The declared vibration and noise emission values represent the main applications of the tool. However, if the tool is used for different
applications, used with different accessories, or poorly maintained, the vibration and noise emission may differ. These conditions may
significantly increase the exposure levels over the total working period.
An estimation of the level of exposure to vibration and noise should take into account the times when the tool is turned off or when it is
running idle. These conditions may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration and noise, such as maintaining the tool and the
accessories, keeping the hands warm, and organising work patterns.
8
A18IW12
Cordless impact wrench
18 V
12,7 mm (1/2")
0-1,800 min
-1
0-2,200 min
-1
0-2,700 min
-1
3,100 min
-1
200 Nm
260 Nm
542 Nm
678 Nm
M19
1.75 kg
L
=101.0 dB(A) / K
=3 dB(A)
pA
pA
L
= 109 dB(A) / K
= 3 dB(A)
WA
WA
a
= 13.9 m/s
/ K = 1,5 m/s
2
h
2
Advertisement
