Advertisement
TIP: Garmin recommends you secure your
bike on a stand while installing the sensor.
Place and hold the speed sensor on
1
top of the wheel hub.
Pull the strap
around the wheel
2
hub, and attach it to the hook
the sensor.
The sensor may be tilted when
installed on an asymmetrical hub. This
does not affect operation.
Rotate the wheel to check for
3
clearance.
The sensor should not contact other
parts of your bike.
Quick Start Manual
NOTE: The LED flashes green for five
seconds to indicate activity after two
revolutions.
Device Information
Charging the Device
on
To prevent corrosion, thoroughly dry the
USB port, the weather cap, and the
surrounding area before charging or
connecting to a computer.
The device is powered by a built-in lithium-
ion battery that you can charge using a
standard wall outlet or a USB port on your
computer.
NOTE: The device will not charge when
outside the approved temperature range
(page 12).
Pull up the weather cap
1
USB port
NOTICE
from the
.
11
Advertisement
