Setting Up Extended Display Mode; Exiting Extended Display Mode; Device Information; Specifications - Garmin Edge 820 Owner's Manual

Hide thumbs Also See for Edge 820:
Table of Contents

Advertisement

Setting Up Extended Display Mode

You can use your Edge device as an extended display to view
data screens from a compatible Garmin multisport watch. For
example, you can pair a compatible Forerunner
display its data screens on your Edge device during a triathlon.
1
From your Edge device, select
Display Mode > Connect Watch.
2
From your compatible Garmin watch, select Settings >
Sensors & Accessories > Add New > Extended Display.
3
Follow the on-screen instructions on your Edge device and
Garmin watch to complete the pairing process.
The data screens from your paired watch appear on the Edge
device when the devices are paired.
NOTE: Normal Edge device functions are disabled while
using Extended Display mode.
After pairing your compatible Garmin watch with your Edge
device, they connect automatically the next time you use
Extended Display mode.

Exiting Extended Display Mode

While the device is in Extended Display mode, tap the
screen, and select Exit Extended Display Mode >

Device Information

Specifications

Edge Specifications

Battery type
Rechargeable, built-in lithium-ion battery
Battery life
12 hr., typical usage
Operating temperature
From -20º to 60ºC (from -4º to 140ºF)
range
Charging temperature
From 0º to 45ºC (from 32º to 113ºF)
range
Radio frequency/
2.4 GHz ANT+ wireless communications
protocol
protocol
Bluetooth Smart wireless technology
Wi‑Fi wireless technology
Water rating
IEC 60529 IPX7*
*The device withstands incidental exposure to water of up to 1 m
for up to 30 min. For more information, go to
/waterrating.

Heart Rate Monitor Specifications

Battery type
User-replaceable CR2032, 3 volts
Battery life
Up to 4.5 yr. at 1 hr./day
Water resistance
3 ATM*
NOTE: This product does not transmit heart
rate data while swimming.
Operating temperature
From -5° to 50°C (from 23° to 122°F)
range
Radio frequency/
2.4 GHz ANT+ wireless communications
protocol
protocol
*The device withstands pressure equivalent to a depth of 30 m.
For more information, go to www.garmin.com/waterrating.

Speed Sensor and Cadence Sensor Specifications

Battery type
User-replaceable CR2032, 3 volts
Battery life
Approximately 12 months (1 hour per day)
Operating temperature
From -20º to 60ºC (from -4º to 140ºF)
range
Device Information
®
device to
> Settings > Extended
.
www.garmin.com
Radio frequency/protocol
2.4 GHz ANT+ wireless communications
protocol
Water rating
1 ATM*
*The device withstands pressure equivalent to a depth of 10 m.
For more information, go to www.garmin.com/waterrating.

Device Care

Do not store the device where prolonged exposure to extreme
temperatures can occur, because it can cause permanent
damage.
Never use a hard or sharp object to operate the touchscreen, or
damage may result.
Avoid chemical cleaners, solvents, and insect repellents that can
damage plastic components and finishes.
Secure the weather cap tightly to prevent damage to the USB
port.

Cleaning the Device

1
Wipe the device using a cloth dampened with a mild
detergent solution.
2
Wipe it dry.
After cleaning, allow the device to dry completely.

Caring for the Heart Rate Monitor

You must unsnap and remove the module before washing the
strap.
A build up of sweat and salt on the strap can decrease the ability
of the heart rate monitor to report accurate data.
• Go to
www.garmin.com/HRMcare
instructions.
• Rinse the strap after every use.
• Machine wash the strap after every seven uses.
• Do not put the strap in a dryer.
• When drying the strap, hang it up or lay it flat.
• To prolong the life of your heart rate monitor, unsnap the
module when not in use.

User Replaceable Batteries

See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.

Replacing the Heart Rate Monitor Battery

1
Use a small Phillips screwdriver to remove the four screws on
the back of the module.
2
Remove the cover and battery.
3
Wait 30 seconds.
4
Insert the new battery with the positive side facing up.
NOTE: Do not damage or lose the O-ring gasket.
NOTICE
NOTICE
for detailed washing
WARNING
19

Advertisement

Table of Contents
loading

Table of Contents