Step 3 : Installing The Media Holder - Roland SOLJET PRO 4 XR-640 Setup Manual

3. Assembling and Installing

Step 3 : Installing the Media Holder

WARNING
Procedure

Place the shafts on the stand.

Pass the media holder (left) through the front shaft.
Pass it through from the right edge (as seen from the back of the machine).
Hook the media holder (left) on the shaft in the back.
w
Move the media holder (left) to the left side of the shafts.
Attach the retaining screw.
Only light tightening is necessary for the retaining screw. The retaining screw may get damaged if tight-
ened excessively.
Retaining screw
28
Perform this task with all power switches left switched off.
Otherwise sudden movement of the machine may cause injury.
Tighten loosely.
Shafts