Installer Settings: Tables To Be Filled In By Installer; Configuration Wizard - Daikin Altherma 3 R MT F User Reference Manual

12 Installer settings: Tables to be filled in by
installer

12.1 Configuration wizard

ELVZ12S18+23E
Daikin Altherma 3 R MT F
4P708480-1 – 2023.05
12

Installer settings: Tables to be filled in by installer

|
Setting
System
Indoor unit type (read only)
Backup heater type [9.3.1] (read
only)
Domestic hot water [9.2.1]
Emergency [9.5]
Number of zones [4.4]
Backup heater
Voltage [9.3.2]
Configuration [9.3.3]
Capacity step 1 [9.3.4]
Additional capacity step 2
[9.3.5] (if applicable)
Main zone
Emitter type [2.7]
Control [2.9]
Setpoint mode [2.4]
Schedule [2.1]
WD curve type [2.E]
Additional zone (only if [4.4]=1, dual zone)
Emitter type [3.7]
Control (read only) [3.9]
Setpoint mode [3.4]
Schedule [3.1]
WD curve type [3.C] (read only)
Tank
Heat up mode [5.6]
Comfort setpoint [5.2]
Eco setpoint [5.3]
Reheat setpoint [5.4]
Setpoint mode [5.B]
WD curve type [5.E] (read only)
Fill in...
User reference guide
63