Subscribe to Our Youtube Channel
Related Manuals for syscomtec SCT-SW21UCKVM
Summary of Contents for syscomtec SCT-SW21UCKVM
- Page 1 SCT-SW21UCKVM USB 10G Switcher 2x1 with Auto Switching All Rights Reserved Version: SCT-SW21UCKVM_2023V1.0 User Manual...
- Page 2 USB 10G Switcher 2x1 with Auto Switching Preface Read this user manual carefully before using the product. Pictures shown in this manual are for reference only. Different models and specifications are subject to real product. This manual is only for operation instruction, please contact the local distributor for maintenance assistance.
- Page 3 USB 10G Switcher 2x1 with Auto Switching SAFETY PRECAUTIONS To ensure the best from the product, please read all instructions carefully before using the device. Save this manual for further reference. Unpack the equipment carefully and save the original box and packing material for ⚫...
-
Page 4: Table Of Contents
USB 10G Switcher 2x1 with Auto Switching Table of Content 1. Product Introduction ....................1 1.1 Feature ......................1 1.2 Package List ...................... 1 2. Specification ....................... 2 3. Panel Description ......................3 3.1 Front Panel ......................3 3.2 Rear Panel ......................4 4. -
Page 5: Product Introduction
USB 10G Switcher 2x1 with Auto Switching 1. Product Introduction Thanks for choosing the SCT-SW21UCKVM 10G hub, which is designed to switch the host and connect KVM devices to control the host. The hub can be controlled by button in front panel and GUI. -
Page 6: Specification
USB 10G Switcher 2x1 with Auto Switching 2. Specification HOST Host (2) USB-B Host Connector (2) USB-B Bandwidth Up to 10Gbps DEVICES Devices (3) USB-A (1) USB-C Device Connector (3) USB-A (1) USB-C Three USB-A and one USB-C share 2A total Current current Control... -
Page 7: Panel Description
USB 10G Switcher 2x1 with Auto Switching 3. Panel Description 3.1 Front Panel ① LED light: ⚫ Power LED: The indicator illuminates green when powering on and flashes when the devices current is overloaded. ⚫ HOST LED: When switching to the current host, the indicator illuminates blue, otherwise it turns off. -
Page 8: Rear Panel
USB 10G Switcher 2x1 with Auto Switching 3.2 Rear Panel ① DEVICES: 3x USB-A 3.2 gen2 for connecting KVM devices; 1x USB-C 3.2 gen2 for connecting camera device; Four USB devices port share 2A total current. ② TCP/IP: RJ45 to connect central control device (e.g. PC). ③... -
Page 9: System Connection
USB 10G Switcher 2x1 with Auto Switching 4. System Connection Usage Precautions Make sure all components and accessories included before installation. ⚫ System should be installed in a clean environment with proper temperature and ⚫ humidity. All of the power switches, plugs, sockets, and power cords should be insulated and ⚫... -
Page 10: Panel Drawing
USB 10G Switcher 2x1 with Auto Switching 5. Panel Drawing... -
Page 11: Gui Control
USB 10G Switcher 2x1 with Auto Switching 6. GUI Control The switcher can be controlled via TCP/IP. The default IP settings are: IP Address: 192.168.0.178 Telnet Port: 4001 Subnet Mask: 255.255.255.0 Type 192.168.0.178 in the internet browser, it will enter the below Operation page: The default user name and password is: User Name: Admin Password: admin... -
Page 12: Switch
USB 10G Switcher 2x1 with Auto Switching 6.1 Switch ⚫ Select which host to be controlled by devices: HOST 1 or HOST 2. ⚫ Select the switch mode: Auto or Manual (The Auto button illuminates blue means the switch is under auto mode and light off when under manual mode). ⚫... -
Page 13: Display Control
Device 1-4: Turn on/off the device port power. 6.2.2 Display Control When there is a display (such as touch panel) connecting with two host sources and under the same network with the SCT-SW21UCKVM, we can control the display via the TCP/IP command setting. 6.3 TCP/IP... -
Page 14: Network Setting
USB 10G Switcher 2x1 with Auto Switching Send the TCP/IP command to other devices which is under the same network as SCT- SW21UCKVM. 6.4 Network setting Choose the GUI login address: DHCP or Static IP. 6.5 Security Credentials: Setting the login user name and password. Firmware Upgrade: Upgrade the MCU firmware. -
Page 15: Troubleshooting & Maintenance
USB 10G Switcher 2x1 with Auto Switching 7. Troubleshooting & Maintenance Problems Potential Causes Solutions Color losing or no video signal output in HDMI display. The connecting cables No HDMI signal output in Check whether the cables may not be connected the device while local are connected correctly correctly or it may be... -
Page 16: Customer Service
USB 10G Switcher 2x1 with Auto Switching 8. Customer Service The return of a product to our Customer Service implies the full agreement of the terms and conditions hereinafter. There terms and conditions may be changed without prior notice. 1) Warranty The limited warranty period of the product is fixed three years. - Page 17 USB 10G Switcher 2x1 with Auto Switching Kontakt: syscomtec Distribution AG Raiffeisenallee 8 DE 82041 Oberhaching Telefon: +49 (0) 89 666 109 330 Telefax: +49 (0) 89 666 109 339 E-Mail: post@syscomtec.com Homepage: www.syscomtec.com...
Need help?
Do you have a question about the SCT-SW21UCKVM and is the answer not in the manual?
Questions and answers