Troubleshooting - Panasonic ER-GK60 Operating Instructions Manual

Lubrication
• Apply the oil to the trimmer before and after each use.
1
Remove the blade.
2
Apply a drop of the oil to each
indicated point.
3
Attach the blade to the
main body, turn on the power
and allow to run for
approximately 5 seconds.
Removing and mounting the blade
Removing the blade
Hold the trimmer and push the blade with
your thumb.
Mounting the blade
B
Fit the mounting hook ( ) into the blade mounting (
trimmer and then push in until you hear a click.
A
B
PB014365 - ER-GK60 _(01EN)_02-21-17.indd 13

Troubleshooting

Perform the following actions.
If the problems still cannot be solved, contact the store where you
purchased the unit or a service centre authorized by Panasonic
for repair.
Problem
The blade has not been
cleaned properly.
Makes a loud sound.
A
) on the
Action
When the trimmer is very dirty,
remove the blade and wash with
water. (See page 12.)
Apply oil. (See page 13.)
Confirm that the blade is properly
attached.
13
2017/2/21 17:20:20