Table of Contents
Advertisement
Pre-operation checks
flood the engine compartment and cause
the watercraft to submerge.
1 Stern drain plug
2 O-ring
Securely install the stern drain plugs by tight-
ening them until they stop.
1 Stern drain plug
EJU41441
Hood check
Push down on the rear of the hood and make
sure that it is securely closed.
74
EJU40146
Post-launch checks
[ECJ00363]
Perform the post-launch checks in the pre-
operation checklist while the watercraft is in
the water and the engine is running.
To perform the post-launch checks:
2
(1) Launch the watercraft. (See page 78 for
1
(2) Perform the checks and make sure that
EJU41811
Cooling water pilot outlet check
Make sure that water is discharged from the
port (left) cooling water pilot outlet while the
engine is running. (See page 30 for informa-
tion on the cooling water pilot outlets.)
1
EJU32715
Multifunction information center check
Make sure that the multifunction information
center operates properly. (See page 39 for in-
information on launching the watercraft.)
there are no malfunctioning items or oth-
er problems.
Advertisement
Table of Contents
