Table of Contents
Advertisement
Section 3
Installation
Board Installation
This section describes the Expansion Board installation procedure.
Caution:
familiar with the safety precautions at the beginning of this
manual. Do not proceed if you are unsure of the safety
precautions described. If you have any questions, contact
BALDOR before you proceed.
1.
Remove the expansion board from the shipping container.
2.
Remove all packing material from the board.
Caution:
board. Conductive foam may be present on the connectors
to prevent static build up during shipping. This can prevent
proper circuit operation.
If you are installing only one board, refer to the "Single Expansion Board
Installation" procedure. If you are installing two expansion boards (or a
second board) refer to the "Dual Expansion Board Installation"
procedure.
Before you proceed, be sure to read and become
Be sure all packing materials are removed from the
Installation 3-1
Advertisement
Table of Contents
