Klarstein MultiChef 4 Manual page 45

TABLE 2: How to convert gas Source
Burners Flame
Regular burners Full flame
Saving flame
Valve adjustment
Valve adjustment should be done with the control knob set at Burner ON saving flame
position.
Remove the knob, and adjust the flame with a tiny screwdriver (see fig. below)
To check the adjusted flame: heat the burner at full open position for 10 minutes. Then
turn the knob into the saving setting. The flame should not extinguish nor move to the
nozzle. If it extinguish or moves to the nozzle, readjust the valves.
Converting the Converting the
hob from LPG hob from natural
to natural gas gas to LPG.
Replace the burner Replace the burner
nozzle according Nozzle according
to the guidelines in to the guidelines in
Table 1. Table 1.
Loosen the Loosen the
adjustment. adjustment.
Spindle (see fig. Spindle (see fig.
below) below)
And adjust the And adjust the
flame. flame.
EN
45