Notes On Safety; Symbols In The Manual; Symbols On The Equipment; General Notes On Safety - Grizzly GP 2832 K Translation Of The Original Instructions For Use

Notes on Safety

This section deals with the general safety
regulations for working with the equipment.

Symbols in the manual

Warning symbols with informa-
tion on damage and injury pre-
vention.
Instruction symbols (the instruction
is explained at the place of the ex-
clamation mark) with information on
preventing damage.
Help symbols with information on
improving tool handling.

Symbols on the equipment

Attention! Do not use for water with
a high sand content!
Read and follow the operating in-
structions provided for the device!
Attention: Remove the plug from
the socket as soon as the power
lead is damaged or cut.
Information of the acoustic power
L
WA
85
level LWA in dB
dB
Electric appliances should not be
disposed of in the domestic gar-
bage.

General notes on safety

Working with the equipment:
Caution: to avoid accidents and in-
juries:
• Keep the equipment away from chil-
dren and pets.
• People who are unfamiliar with the op-
erating instructions are not permitted to
use the equipment. Local regulations
or bylaws may determine the minimum
age for using the device.
• Should there be people in the water,
do not operate the equipment.
• Take appropriate measures to keep
children away from the equipment
whilst it is running.
• Do not use the equipment in the vicin-
ity of flammable liquids or gases. Non-
observance will result in a risk of fire or
explosion.
• Do not use for water with abrasive par-
ticles such as sand. Do not use for wa-
ter containing abrasive particles such
as sand. The dispensing of aggressive,
abrasive (grinding effect), corrosive,
combustible (e.g. motor fuels) or explo-
sive liquids, salt water, cleaning agents
and foodstuffs is not permitted. Liquid
temperature not to exceed 35°C.
• Store the equipment in a dry place and
out of reach of children.
Caution! To avoid damage to the
equipment and any possible person
injury resulting from this:
• Do not work with damaged or incom-
plete equipment, or with equipment
that has been converted without the
approval of the manufacturer. Before
initial operation, have a specialist
check that the required electrical pro-
GB
15