Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for UNI-T UT320T
Summary of Contents for UNI-T UT320T
- Page 1 P/N:110401111770X UT320T 2 in 1 Thermometer User Manual...
- Page 2 PREFACE Thank you for purchasing the new UT320T thermometer. In order to use this product safely and correctly, please read this manual thoroughly, especially the Safety Instructions part. After reading this manual, it is recommended to keep the manual at an easily accessible place, preferably close to the device, for future reference.
-
Page 3: Table Of Contents
UT320T User Manual UT320T User Manual 1. Overview UT320T ("Thermometer "or" Product ") is a thermometer that combines infrared and probe measurements. Infrared measurement is used to quickly scan the surface TABLE OF CONTENTS temperature of an object by measuring the infrared energy radiated by the target surface. -
Page 4: Product Structure
UT320T User Manual UT320T User Manual Do not make the plastic housing contact with high temperature objects to prevent 4. Screen Indicators/Icons plastic deformation and melting. In the probe mode, do not insert the probe into the measured object for a long time. -
Page 5: Specifications
UT320T User Manual UT320T User Manual 5. Specifications Probe type Minimum Probe Model UT320T 12.7mm measuring depth measurement LCD size 18*28mm Operating time About 180h (backlight on) LCD type FSTN Measuring range -40℃~300℃ (-40℉~572℉) Over range Measured value＞maximum range: display “OL”... -
Page 6: Operation
UT320T User Manual UT320T User Manual 6. Operation 6.3 Temperature Measurement Infrared mode: 6.1 Replace Batteries Press the Scan|Hold button to measure the temperature, and release it to stop When using the product for the first time, please install the batteries first. -
Page 7: Infrared Measurement
UT320T User Manual UT320T User Manual 7. Infrared Measurement The following table shows the total emissivity ε of some metals and non-metals. Emissivity Measured surface 7.1 D: S (Distance to Spot Ratio) Metals As the distance (D) between the thermometer and the measured target increases, Aluminum the light spot diameter (S) of the measured area also increases. -
Page 8: Maintenance And Cleaning
8. Maintenance and Cleaning Make sure there are no other obstacles between the product and the measured The ingress protection rating of UT320T thermometer is lP54. The housing and object. probe can be cleaned with a moist sponge or soft cloth. Please dry the product after cleaning.
Need help?
Do you have a question about the UT320T and is the answer not in the manual?
Questions and answers