Download
Share
Print this page
Sojag EVEREST Series Owner's Manual And Assembly Manual
  1. Manuals
  2. Brands
  3. Sojag Manuals
  4. Tent
  5. EVEREST Series
  6. Owner's manual and assembly manual

Sojag EVEREST Series Owner's Manual And Assembly Manual

12' steel garage
Hide thumbs Also See for EVEREST Series:

Advertisement

Quick Links

Download this manual
733290423
Owner's Manual
& Assembly Guide
Gloves must be worn
at all times to reduce
risk of injury!
Register • Enregistrer • Regístrate
/
ShelterLogic.com
product-registration
BUILDING DIMENSIONS
†
Approx.
Storage
Size
Area
12' x 10'
116 Sq. Ft. 1043 Cu. Ft.
2
3,7 m x 3,0 m
10,8 m
Each Extension adds an additional 60" (152,4 cm) in length, 59 Sq. Ft. (5,4
additional storage area, and 529 Cu. Ft. (15,0
†
Size rounded off to the nearest foot
Exterior Dimensions
(Roof Edge to Roof Edge)
Width
Depth
146.13"
123.56"
3
29,5 m
371,2cm
313,8 cm
m 3
) additional storage volume.
Steel Garage
EVEREST SERIES
Visit our website for compatible accessories
Base
Size
Additional
per Extension
Interior Dimensions
Height
Width
Depth
123.48"
141.13"
118.30"
313,6 cm
358,5 cm
300,5 cm
2
)
m
12' GARAGE
arrowshed.com
142.13" x 119.30"
361,0 cm x 303,0 cm
142.13" x 60"
361,0 cm x 152,4 cm
Opening
Height
Width
122.23"
28.30"
(Roll Up Door)
95.00"
310,5 cm
71,9 cm 199,0 cm
(Roll Up Door)
241,3 cm 212,5 cm
* See Inside for Detailed Safety Information.
01GWg
All Sizes
Door
Height
78.35"
83.66"

Advertisement

loading
Need help?

Need help?

Do you have a question about the EVEREST Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Sojag EVEREST Series

Summary of Contents for Sojag EVEREST Series

  • Page 1 01GWg 733290423 Owner’s Manual & Assembly Guide Steel Garage EVEREST SERIES 12’ GARAGE All Sizes Gloves must be worn arrowshed.com at all times to reduce risk of injury! Visit our website for compatible accessories Register • Enregistrer • Regístrate Base 142.13”...
  • Page 2 EN,FR,GE,IT,DT,SL,CZ,SW,RM-02HO GB: Assembly manual in additional languages available onlineN Scan QR code below to accessN FR: Manuel de montage disponible en ligne dans d’autres languesN Pour y accéder scannez le code QR ci dessousN DE: Montageanleitung in zusätzlichen Sprachen online verfügbarN Scannen Sie den QR Code unten um darauf zuzugreifenN IT: Manuale dell’assemblea in altre lingue disponibile onlineN Per accedere effettua la scansione del codice QR in bassoN...

  • Page 3: Safety And Maintenance

    SAFETY & MAINTENANCE 03GW Safety precautions MUST be followed at all times throughout the construction of your building! Care must be taken when handling Practice caution with the tools being Do NOT attempt to assemble your various pieces of your building since used in the assembly of this building.

  • Page 4: What You Need

    ASSEMBLY TIPS & TOOLS 07BQ Watch the Weather Closely: Be sure the day you choose to install your building is dry and calm. Do NOT attempt to assemble your building on a windy day. Be careful on wet or muddy ground. Use Teamwork: Two or more people are required to assemble your building.
  • Page 5 Base 05GW The Base For Your Building Concrete Slab The slab should be at least 4" (10,2 cm) thick. It must be level and fl at to provide good support for the frame. The following are the recommended materials for your base. 2 x 4's (38 mm x 89 mm) (will be removed once the concrete cures) Concrete Sheet of 6 mil plastic...
  • Page 6 Anchoring 06GW Anchoring Down The Building It is important that the entire fl oor frame be anchored after the building is erected. Below are recommended ways of anchoring. Anchoring into Wood: Anchoring into Concrete: Use 1/4" (6 mm) Wood Screws. There are 1/4" (6 mm) For poured concrete slab or footing or patio blocks: Use 1/4"...
  • Page 7 HARDWARE LIST... 07GWb Part Part Hardware Views by Key No. Qty. List Description 65103 Hex Nut (#8-32) 65101 Square Nut (1/4-20) 65106 Square Nut (#10-32) 65943 Bolt (Bare) (#10-32 x 7/16) (10 mm) 4, 5, 6 8, 9, 10 65943 Bolt (Wall Color) (#10-32 x 7/16) (10 mm) 65943 Bolt (Roof Color) (#10-32 x 7/16) (10 mm)
  • Page 8 PARTS LIST... 08GWb Assembly Part Part Extension Key No. Number Description 1205M 6372 Gable Strut 6380 Gable Brace Outer 6381 Gable Brace Mid 6382 Gable Brace Center Right Gable 7942 7943 Left Gable 11446 Ridge Beam 11150 Right Rear Frame 11151 Frame, Side Floor 11152...
  • Page 9 PARTS LIST... 09GWb Assembly Part Part Extension Key No. Number Description 1205M 11180 Frame, Rear Right 11181 Header Angle Side 11182 Panel, Jamb Right 11183 Track Strut Frame, Side 11184 Panel, Jamb Right 11185 Truss, Column 11186 Chord, Truss Upper 11187 Chord, Truss Lower Outside 11436...
  • Page 10 10GWb Components for Garage Door (GD) #3 End Hinge #2 End Hinge #1 End Hinge #1 Center Hinge Door Section with Door Section weather stripping Roller Inside Step Plate Door Lock Assembly Bottom Bottom Fixture Left Fixture Fixture Right Handle...
  • Page 11 11GWa Components for Garage Door (GD) Snap Latch Snap Latch Keeper Cable Vertical Track Flag Angle Flag Angle Right Left Horizontal Curve Horizontal Curve Track Right Track Left Track Bracket Safety Spring Extension Spring Cable Cable S Hook (Red) Cable Clip (Red) Pulley Eye Bolt &...
  • Page 12 12GWc Hardware for Garage Door (GD) 1/4” x 5/8” Track Bolt 1/4” Sheet 5/16” x 3/4” Bolt & Hex Nut Metal Screw and Hex Nut 1/4” Sheet Metal 3/8” x 1-1/2” Bolt and Screw (Red) Hex Nut (Red) 3/8” x 3/4” Carriage Bolt &...

  • Page 13: Assembly Overview

    ASSEMBLY OVERVIEW 13GWb...
  • Page 14 ASSEMBLY OVERVIEW 14GWb 12 12...
  • Page 15 ASSEMBLY OVERVIEW 15GW 33 33...
  • Page 16 Step 1A 16GWb 11438 11439 80159 66611 11150 65106 65943 (x1) (x2) (x2) (x2) (x12) (x12) (x8) Washers are to be used on painted parts only. Washers are not necessary on unpainted parts and there are not enough to use on every screw and bolt. 11439 11439 11439...
  • Page 17 Step 1B 17GW 65106 11292 11151 65943 Rear (x1) (x1) (x1) (x1) Door Rear Option A Extension Door Option A 12x10 Door 12x15 Door Option B Option B Front Front For Door Option A, put the ramp on the left rear frame. For Door Option B, put the ramp on the right front frame.
  • Page 18 Step 1C 18GW 11151 80141 80145 11158 (x1) (x2) (x1) (x1) 65106 Rear 65943 *Bend tabs up for 80141 and 11151 (x8) (x8) *Holes on Outside Door Option A 12x10 Door Option B Front *Holes on Outside 11’ 9-1/8” 358,5 cm 80141 Rear From Step 1A...
  • Page 19 Step 2A 19GWa 12x10 x1 Extension x1 11434 11435 11437 11436 66611 (x2) (x2) (x32) (x1) (x2) *Lubricate screws to aid assembly 11437 11437 11434 11434 11436 11435 11436 11’ 3-3/4” (344,8 cm) Washers are to be used on painted parts only. Washers necessary unpainted parts and there are 11436...
  • Page 20 Step 2B 20GWa 11191 11187 66611 (x2) (x2) (x36) *Lubricate screws to aid assembly 11191 11191 11191 11434 11187 11437 11437 11191 11191 11187 11187 11187 11436...
  • Page 21 Step 2C 21GWa 65106 65943 7003 7004 (x2) (x2) (x6) (x6) 66611 (x24) 7003 7004 *Lubricate screws to aid assembly Hand tighten bolt 7004 7003 7004 7003 7004 7003 7004 7003...
  • Page 22 Step 2D 22GWb 6228 66611 11186 (x2) (x20) (x2) *Lubricate screws 7022 to aid assembly 11187 7022 7022 11186 (x4) 11186 11186 Tab end to center of building 6228 11435 6228 11’ 9-1/8” (358,5 cm)
  • Page 23 Step 3A 23GWa 12x10 12x15+ 66611 Skip to Step 6A Continue on pg 29 Next Page (x4) *Lubricate screws to aid assembly Rear Front...
  • Page 24 Step 3B 24GWa 12x15+ Only 66611 11155 11159 11163 (x2) (x2) (x2) (x16) *Lubricate screws to aid assembly 65106 65943 (x4) (x4) *Bend tabs up for 11163 and 11155 11159 11159 11159 *Holes on Outside 11163 11159 11163 11163 11155 11155 11155 *Holes on Outside...
  • Page 25 Step 3C 25GWa 12x15+ Only 66611 11177 (x4) (x2) *Lubricate screws to aid assembly *11177 is for temporary use in this step and is used in a later step 11177 11177...
  • Page 26 Step 4A 26GWa 12x15+ Only 65106 65943 Make a double roof (x22) (x22) beam assembly 11447 (x6) *Remove bolt linking brackets before installing roof beams Double beam assembly Front View Single roof beam 11447 11447 11447 11447 11447...
  • Page 27 Step 4B 27GWa 12x15+ Only 65106 11445 65943 (x6) (x6) (x2) 11445 11445...
  • Page 28 Step 5 28GWa 12x20 *12x25+ 11157 11157 11157 11157 *For buildings 25’ and longer, attach 2 wall panels as shown every 10’ for support. Follow Step 12A on page 49 for screw placement...
  • Page 29 Step 6A 29GWa 12x10+ Continued Continue supporting truss for 12x10 until frame is complete 66611 (x4) *Lubricate screws to aid assembly From Step 1C Front From Step 1C...
  • Page 30 Step 6B 30GWa 66611 11165 11156 (x1) (x4) (x1) *Lubricate screws to aid assembly *Holes on Outside 11165 11156 11165 11156 Front...
  • Page 31 Step 6C 31GWa 65106 11152 11156 65943 (x1) (x1) (x1) (x1) 66611 (x2) *Holes on Outside 11152 11152 11152 11152 11156 11156 11165 11156 11156 Front...
  • Page 32 Step 6D 32GWa 80143 11156 80147 65106 65943 (x1) (x1) (x2) (x1) (x1) Repeat Steps 6B and 6C 66611 for the other side with holes facing outside 80143 For Door Option B, (x6) follow Step 9 on page 39 in place of this step 11156 80147 11156...
  • Page 33 Step 6E 33GWa 11158 80145 66611 (x2) (x2) (x8) 65106 65943 (x6) (x6) *Holes on Outside *Holes on Outside 80145 11158 80145 11158 Front...
  • Page 34 Step 7A 34GWa *Leave outside top bolt out for both columns 11179 65106 65943 (x10) (x2) (x10) *Second hole goes towards top 11179 11179 Front...
  • Page 35 Step 7B 35GWa 65106 80191 11290 65943 (x10) (x10) (x1) (x1) 80191 11290 11290 80191 Front...
  • Page 36 Step 7C 36GWa 66611 65106 65943 (x6) (x2) (x6) 11201 11161 11201 11161 (x2) 11161 (x1) 11161 11201 11161 11438/11439 From Step 1A Front...
  • Page 37 Step 8A 37GWa 66611 11156 11165 (x4) (x1) (x1) *Lubricate screws to aid assembly *Holes on Outside 11165 11156 11165 11156 Rear...
  • Page 38 Step 8B 38GWa 65106 66611 65943 11152 11156 (x1) (x1) (x2) (x1) (x1) *Holes on Outside 11152 11152 11152 11152 11156 11156 11165 11156 11156 Rear...
  • Page 39 Step 9 39GW 11176 11184 65106 66611 65943 (x1) (x1) (x1) (x1) (x9) 80143 11156 80143 (x1) (x2) For Door Option B, follow Step 6D on page 32 in place of this step Rear 11156 Door Option A 12x10 Door Option B 11176 Truss...
  • Page 40 Step 10A 40GWa 11186 66611 (x1) (x8) *Lubricate screws to aid assembly From Step 1A 11186 Rear...
  • Page 41 Step 10B 41GWa 66611 65106 65943 11180 80149 (x5) (x6) (x1) (x1) (x5) *Lubricate screws *Bend tabs up for 80149 and 11180 to aid assembly 80149 11180 Rear...
  • Page 42 Step 11A 42GWb 7943 6381 7942 6380 69835 (x2) (x4) (x4) (x2) (x4) 65106 65943 66646 (x28) (x28) (x28) 6381 *Bolts to match wall panel color 6381 Mounting leg faces inwards Mounting leg faces inwards 69835 69835 7943 7942 6380 6380 Mounting leg faces inwards...
  • Page 43 Step 11B 43GWa 66611 65106 6382 65943 6382 (x40) (x6) (x2) (x6) Front Rear...
  • Page 44 Step 11C 44GWb *Repeat this page for the Rear of the shed Make 2 double roof 11446 beam assemblies 65106 65943 (x12) (x44) (x44) Top View Gable Beam Double beam assembly Single roof beam *Remove bolt linking brackets before installing roof beams Double beam assembly Front View...
  • Page 45 Step 11D 45GWa 6372 11445 65106 65943 (x2) (x14) (x2) (x14) 11445 11445 Rear Front 11445 6372...
  • Page 46 46GW Squaring and Anchoring Measure the diagonals to make sure the building is square. Use this time to anchor the building down. See the anchoring guide on page 6. 12x10 12x15+...
  • Page 47 47GW OPTIONAL CAULK APPLICATION To reduce water infi ltration, apply caulk around the perimeter of the shed before installing panels.
  • Page 48 Side Panel Orientation 48GW 11157 11157 11157 11157 12x10 Rear Front Door 11160 11157 11157 Option A 12x15 11157 11166 11157 11157 11157 11157 11157 Extension Kit(s) Rear Front Extension Kit(s) Door 11157 11157 11157 11157 11166 11160 Option A...
  • Page 49 Step 12A 49GW 66611 11157 Extension x1 *For 12x15’+ sheds, 66646 remove the bracing 66611 11157 from step 3C on page 66646 (x3) (x48) 25. Set that piece (x48) aside for later use. *Lubricate screws (x4) (x66) (x66) to aid assembly Washers are to be used on painted parts only.
  • Page 50 Step 12B 50GW 66611 11157 66646 (x54) (x3) (x54) Painted screws are to be used on painted parts only. Make sure painted screws match wall color. *When overlapping panels, make sure arrow is towards the top and covered up Continue installing panels up to each of the corners except by the door.
  • Page 51 Step 12C 51GW 12x15+ Only 66611 11166 66646 (x24) (x2) (x24) Painted screws are to be used on painted parts only. Make sure painted screws match wall color. Install Panels to cover each of the gaps except around door 11166 *When overlapping panels, make sure arrow is towards the top and covered up...
  • Page 52 Step 13A 52GW 66611 66611 11181 11207 66646 (x4) (x1) (x1) (x4) (x1) 11181 *When overlapping panels, make sure arrow is towards the top and covered up Door Option A shown 11181 11181 11181 Painted screws are to be used on painted parts only. Make sure painted screws match wall color.
  • Page 53 Step 13B 53GW 66611 65106 65943 66646 (x7) (x7) (x7) (x14) 11291 11170 *When overlapping panels, make sure (x1) (x1) arrow is towards the top and covered up Painted fasteners are to be used on painted parts only. Make sure painted fasteners match wall color. 11170 11291 11170...
  • Page 54 Step 13C 54GW 66611 11160 65106 65943 66646 (x7) (x1) (x8) (x1) (x1) Painted fasteners are to be used on painted parts only. Make sure painted fasteners match wall color. *When overlapping panels, make sure arrow is towards the top and covered up 11160...
  • Page 55 Step 13D 55GW 66611 11182 80153 (x1) (x10) (x1) 66646 (x10) 11182 80153...
  • Page 56 Step 14 56GW 80161 11173 11172 11169 66611 66646 (x1) (x68) (x1) (x1) (x4) (x68) Painted fasteners are to be used on painted parts only. Make sure painted fasteners match wall color. 11172 11172 11169 11173 11172 11172 80161 *When overlapping panels, make sure arrow is covered up 4-9/16”...
  • Page 57 Step 15 57GW 11166 11157 66611 66646 (x3) (x96) (x4) (x96) Painted fasteners are to be used on painted parts only. Make sure painted fasteners match wall color. *When overlapping panels, make sure arrow is towards the top and covered up 4-9/16”...
  • Page 58 Step 16A 58GW 11168 11153 (x4) (x4) 65106 65943 66646 11168 (x28) 11153 (x28) (x28) Painted fasteners are to be used on painted parts only. Make sure painted fasteners match wall color.
  • Page 59 Step 16B 59GWa Painted fasteners are to be used on painted parts 66611 66646 only. Make sure painted fasteners match wall color. (x48) (x48) Install the corner panel subassemblies to each of the 4 corners. Front Subassembly Subassembly from page 58 from page 58 Rear...
  • Page 60 Roof Panel Orientation 60GW Rear 80151 11178 12x10 11174 11174 11174 11174 11174 11174 11174 11174 80151 11178 Front Rear 80151 11178 12x15 11174 11174 11174 11174 11174 11174 Extension Kit(s) 11174 11174 11175 11175 11174 11174 11174 11174 11178 80151 Front...
  • Page 61 Step 17A 61GWb 66611 65106 65943 11178 66646 (x5) (x5) (x8) (x13) (x1) Use painted fasteners that match roof panel color 11178 Front 69835...
  • Page 62 Step 17B 62GWa 66611 11174 66646 (x48) (x2) (x48) Use painted fasteners that match roof panel color *When overlapping panels, make sure arrow is towards the top and covered up 11174 11174 Front...
  • Page 63 Step 17C 63GWa Extension x1 12x15+ 66611 11174 11175 65106 66646 65943 (x2) (x60) (x1) (x59) (x1) (x1) *Lubricate screws to aid assembly Use painted fasteners that match roof panel color *When overlapping panels, make sure arrow is towards the top and covered up Install panels in this order for every 5’...
  • Page 64 Step 17D 64GWa 66611 80151 11174 66646 65106 65943 (x65) (x2) (x6) (x1) (x59) (x6) Use painted fasteners that match roof panel color *When overlapping panels, make sure arrow is towards the top and covered up *Use bolt for top of truss Rear 80151 11174...
  • Page 65 Step 18A 65HJa 66611 11178 11174 11202 66646 65106 65943 (x2) (x65) (x1) (x1) (x56) (x11) (x11) 30026 (x1) Use painted fasteners that match roof panel color *When overlapping panels, make sure arrow is towards the top and covered up Rear 11178 11174...
  • Page 66 Step 18B 66GW Extension x1 12x15+ 11174 11205 11175 66611 66646 (x68) (x2) (x1) (x1) (x59) 65106 *Lubricate screws 65943 to aid assembly (x9) (x9) Use painted fasteners that match roof panel color *When overlapping panels, make sure arrow is towards the top and covered up 11205 *Use bolt for top of truss...
  • Page 67 Step 18C 67GWa 66611 65106 11174 66646 11202 65943 (x54) (x7) (x47) (x2) (x7) (x1) *Lubricate screws Use painted fasteners that to aid assembly match roof panel color *Use bolt for top of truss 11174 11174 Front *When overlapping panels, make sure arrow is towards the top and covered up 11202...
  • Page 68 Step 18D 68HJa 66611 65106 80151 30026 65943 66646 (x7) (x17) (x12) (x7) (x1) (x1) Use painted fasteners that match roof panel color *When overlapping panels, make sure arrow is towards the top and covered up 80151 Front 69835 30026...
  • Page 69 Step 19 69GW Extension x1 66611 11204 66646 66611 11203 66646 (x4) (x12) (x16) (x4) (x10) (x10) (x2) Install roof trim on both sides of the shed Front 11204 11203 12x15+ Install a 11203 roof trim for every 5’ extension section Rear 11204...
  • Page 70 Step 20A 70GW 66611 11200 11195 (x1) (x2) (x6) 11195 11195 11200...
  • Page 71 Step 20B 71GW 30005 30018 Once tape sticks to a surface it CAN NOT be removed. (x1) (x2) Wipe the legs of 11195 thoroughly with alcohol pads (30018) before applying tape (30005) Approximately 11” (27,9 cm) Approximately 11” (27,9 cm) Press tape fi...
  • Page 72 Step 20C 72GW 66783 65103 66609 11193 (x3) (x1) (x9) (x9) 11193 66609...
  • Page 73 Step 20D 73GW M5x10 Screw M5 Hex Nut Use hardware supplied Mortise M5 Washer with handle assembly box (6PP30002) for (x2) (x1) (x2) (x2) this page Make sure holes are in the orientation shown Mortise Door Latch Orientation Top View Outside Door Outside Door Correct...
  • Page 74 Step 20E 74GW Peel off the backs of the tape before proceeding. Once tape sticks to a surface it CAN NOT be removed. Lay the front panel on a fl at From Step 20B surface. Using at least 2 people, place the edge of the back panel on the edge of the front panel with the mortise From Step 20D...
  • Page 75 Step 20F 75GW Use painted fasteners that match wall color 66611 11196 66646 *Washers on outside only (x6) (x2) (x22) 11196 11196...
  • Page 76 Step 21A 76GW Use hardware supplied with handle assembly box (6PP30002) for this page Strike Plate M5 Washer (x1) (x2) M5x10 Screw M5 Hex Nut (x2) (x2) 11182 80153...
  • Page 77 Step 21B 77GW 66611 11177 (x2) (x6) 11177 11177...
  • Page 78 Step 21C 78GW 66783 65103 (x9) (x9)
  • Page 79 Step 22A 79GW Use hardware supplied with handle assembly M4x5 Screw box (6PP30002) for this page (x2) Post goes in all the way Use Allen wrench to tighten set screw DO NOT lose keys. Replacement keys are not available...
  • Page 80 Step 22B 80GW Use hardware supplied M5x30 Screw Back Handle with handle assembly box (6PP30002) for (x1) (x2) this page Back Handle From Step 22A...
  • Page 81 81GWa Step 23A: Bottom Panel 1/4” Sheet Metal Inside Step Plate Handle Screw Bottom Door Section Bottom Gripping Point/Step Plate Kit Look for the section with weather seal attached to it. This is the bottom section. Set it on table face down (the face is the outside of the door).
  • Page 82 82GWa Step 23B: Bottom Panel 1/4” Sheet Metal 1/4” Sheet Metal Bottom Fixture Bottom Fixture #1 Center Hinge #1 End Hinge Screw Screw (Red) Roller Right Left Roller Sections are attached to each other with hinges. Fasten Carrier hinges marked #1 to top of bottom section at each stile us- ing (2) 1/4”...
  • Page 83 83GWb Step 24A: #2 Panel #2 Door Section Door Lock Assembly Drill one 1/2” center hole and two 3/8” side holes through the #2 section, as shown below. Drill completely through the section. Install lock assembly in section. #2 Section lock/outside handle guide...
  • Page 84 84GWb Step 24B: #2 Panel 1/4” Sheet Metal Snap Latch Screw Attach a snap latch assembly to each end stile using two 1/4” sheet metal screws. #2 Section 1/4” Sheet Metal Screw “11” snap latch “15” 1/4” Sheet Metal Screw...
  • Page 85 85GWb Step 24C: #2 Panel 1/4” Sheet Metal #1 Center Hinge #2 End Hinge Roller Screw Fasten end hinges marked #2 to top of section on each end stile. Use (2) 1/4” sheet metal screws per hinge. Make sure that the two slots are at top of hinge. Insert a roller into each end hinge as shown. Attach #1 center hinge.
  • Page 86 86GWa Step 25: #3 Panel 1/4” Sheet Metal #1 Center Hinge #3 Door Section #3 End Hinge Roller Screw Fasten end hinges marked #3 to top of section on each end stile. Use (2) 1/4” sheet metal screws per hinge. Make sure that the two slots are at top of hinge. Insert a roller into each end hinge as shown. Attach #1 center hinge.
  • Page 87 87GWa Step 26a: Track Installation You will need for this page: 1/4” x 5/8” Track Flag Angle Right Flag Angle Left Track Bracket Bolt & Hex Nut Vertical Track Prepare the Vertical Tracks. The top of the vertical track must pitch back from the jamb for door to seal properly. This spacing is set by use of 2 slot universal track brackets.
  • Page 88 88GWb Step 26B: Track Installation 1/4-20x1/2” Hex 1/4-20 Square 1” Washers Head Bolt Fasten the vertical track and fl ag angle assembly to the door jamb using 1/4” Bolt and Hex Nut with 1” Washer. Follow the orientation as shown below. Do this for both the right and left vertical tracks. Flag Angle Right Flag Angle...
  • Page 89 89GWb Step 27A: Insert Panels Assemblies from Step 23: • Bottom Panel Subassembly Insert the bottom section into the doorway. Slide the rollers into the vertical track as shown. Center and level bottom section in opening. If there is a gap on one end at the fl oor then the track will not rest on the fl...
  • Page 90 90GWc Step 27B: Insert Panels Assemblies from Step 24: • #2 Panel Subassembly Stack #2 section (with #2 end hinges) on top of bottom (#1) section while sliding rollers into vertical track. #2 Panel Assembly Roller Vertical Track...
  • Page 91 91GWc Step 27C: Insert Panels 1/4” Sheet Metal Screw Attach the #1 end hinges and center hinge to the #2 section with 1/4” sheet metal screws. 1/4” Sheet Metal Screws...
  • Page 92 92GWc Step 27D: Insert Panels Assemblies from Step 25: • #3 Panel Subassembly Stack #3 section (with #3 end hinges) on top of #2 section while sliding rollers into vertical track. #3 Panel Assembly Roller Vertical Track...
  • Page 93 93GWc Step 27E: Insert Panels 1/4” Sheet Metal Screw Attach the #2 end hinges and center hinge to the #3 section with 1/4” sheet metal screws. 1/4” Sheet Metal Screws...
  • Page 94 94GWa Step 28: Snap Latch Keeper 1/4” x 5/8” Track Snap Latch Bolt & Hex Nut Keeper Attach a snap latch keeper to each vertical track using a bolt and nut. left side #2 Panel Assembly snap latch keeper 1/4” x 5/8” track bolt right side 1/4”...
  • Page 95 95GWc Step 29: Thread Cable 1/4” x 5/8” Track right side Cable Handle Bolt & Hex Nut Insert cable through left snap latch hole. Place a lug on the end of the cable to prevent it from snap latch sliding out. cable Feed the cable through the inside handle.
  • Page 96 96GWa Step 30A: Horizontal Track 11197 66611 65106 65943 (x8) (x8) (x4) (x8) Assemble door track supports using screws. 11197 11197 11197 (x2) TOP VIEW 11197 Roof Beam Attach door track support assembly to roof beam using four bolts and square nuts. FRONT...
  • Page 97 97GW Step 30B: Horizontal Track 66611 11183 (x4) (x2) 12x10 Attach track strut to rear frame using one screw. VIEW FACING REAR 11183 11183 VIEW FACING FRONT Attach track strut to door track support assembly using one screw.
  • Page 98 98GWa Step 30C: Horizontal Track 11183 66611 (x4) (x2) Attach track strut to door track support 12x15+ assembly using one screw. Truss Truss FRONT VIEW FACING 11183 FRONT 11183 VIEW FACING REAR Attach track strut to truss using one screw. 11183 11183 Truss...
  • Page 99 99GWb Step 30D: Horizontal Track 3/8” x 3/4” Carriage 1/4” x 5/8” Track Right Horizontal Horizontal Left Horizontal Bolt and Hex Nut Bolt & Hex Nut Curve Track Bracket Curve Track Have another person hold the end of the Fasten angle (attached to horizontal curve right horizontal curve track.
  • Page 100 100GWa Step 30E: Horizontal Track 65106 65943 (x2) (x2) Attach the end of the Right Horizontal Curve Track to the Door Track Support Assembly using bolts and nuts as shown. Repeat for Left Horizontal Track. Door Track Support Assembly Right Horizontal Curve Track...
  • Page 101 101GWc Step 31A: Insert Top Panel Top Door Section Assembling the top door panel will require another person holding the door section while attaching the fi xtures and hinges. Make sure adequate help is available before continuing on with the installation. Have someone stack the top section on top of the other door sections and hold it there.
  • Page 102 102GWb Step 31B: Insert Top Panel 1/4” Sheet Metal Top Fixture Roller Screw Place a roller inside of a top fi xture. Roller Fixture Slide the roller into the horizontal track where it is wide enough to put the roller as shown. You may have to angle it in. Slide the roller through the track so it lines up with the top track.
  • Page 103 103GWb Step 31C: Insert Top Panel 1/4” Sheet Metal Top Fixture Roller Screw Section Place another roller into the other top fi xture. Fixture Roller Slide the roller into the horizontal track where it is wide enough to put the roller as shown.
  • Page 104 104GWc Step 31D: Insert Top Panel 1/4” Sheet Metal Screw Attach the #3 end hinges and center hinge to the top section with 1/4” sheet metal screws. 1/4” Sheet Metal Screws...
  • Page 105 105GW Spring Assembly Preparation Check all spring assembly instructions and parts. Warning! If there appears to be any parts missing stop here and contact your Arrow Customer Service im- mediately. Do not substitute parts. Warning! Do not remove any factory applied spring tag or warning label! If any tags or labels are missing or unreadable, contact your Arrow Customer Service immediately.
  • Page 106 106GWa Step 32A: Extension Spring Assembly Pulley 3/8” x 1-1/2” Bolt (Red) 3/8” x 1-1/2” Bolt and Hex Nut (Red) Pulley 3/8” Hex Nut Attach pulley with a 3/8” x 1-1/2” bolt and hex nut on angle which attaches horizontal track to fl...
  • Page 107 107GWa Step 32B: Extension Spring Assembly 3/8” x 1-1/2” Bolt and Eyebolt and Hex Extension Pulley Clevis Safety Cable Hex Nut (Red) Nut (Red) Spring Assemble spring as shown. Bolt a clevis and pulley on one end Clevis 3/8” x 1-1/2” Bolt Extension Spring (Red) Hex Nut (Red)
  • Page 108 108GWa Step 32C: Extension Spring Assembly Spring Cable S Hook (Red) Cable Clip (Red) Attach spring cable loop to bottom Spring fi xture stud and thread spring cable Cable Loop over pulley. Pulley Thread spring cable around spring pulley. Spring Pulley Spring Cable...
  • Page 109 109GWa Step 32D: Extension Spring Assem- Safety Cable Cable Knot Tie the safety cable securely to the horizontal curve track as shown. Horizontal Curve Track Repeat steps 4 through 12 for the other spring. Lowering the door and spring adjustment. Warning! Until all adjustments are completed, always assume you will have to physically support the full weight of the door.
  • Page 110 Step 33 110GWa 66611 30032 11185 11171 66646 (x16) (x1) (x1) (x16) Painted fasteners are to be used on painted parts only. (x1) Make sure painted fasteners match wall color. 30032 11171 11185 11171 Front It is important to ensure that the building is anchored IMPORTANT: after construction.
  • Page 111 111GW Installing Garage Opener The garage is designed to accomodate a variety of centerline track garage door openers, and the installation process may vary. Be sure to follow the instructions included with the garage door opener you are using. Attach the opener at the locations highlighted below. 804860 (x8) NOTE: Attach Bracket to the Header with the screws provided.

  • Page 112: Assembly Notes

    ASSEMBLY NOTES...

This manual is also suitable for:

Grc1210