Positioning The Stand - TEFAL OptiGrill+ Initial Manual

1 2 3
NOTE: In order to cook with the waffle plates, the OptiGrill must be placed horizontally using
the retractable stand provided.
Optigrill+ initial / Optigrill+ /
Optigrill+ Elite
Optigrill Smart
* *
** **
2
1
8
1
Waffle plates
2
Ladle
3
Retractable stand

POSITIONING THE STAND:

Turn the appliance upside down and
remove the drip tray. Fit the retractable
stand under your grill. This stand allows
you to put your grill in two different
positions:
*The stand towards the rear: position for
cooking with the grill plates or the oven
accessory (depending on the model).
** The stand folded forwards with the
grill positioned horizontally: position
for cooking with the waffle plates.
The stand only needs to be fitted on
the grill during first use and should not
be removed. For all subsequent uses,
the stand can simply be tilted forwards
or backwards to the desired position
(grill or waffles).
COOKING:
2H
1. If your OptiGrill is already on and
you want to use your waffle plates,
unplug the grill and let it cool down
for at least 2 hours.
2. Put the grill in waffle mode (**) and
reattach the drip tray. Open the
grill, remove the cooking plates
and replace them with the waffle
plates. Fit the bottom plate first,
then the top plate.
3. Close and plug in the appliance.
4. Press the On/Off button.
5. OptiGrill switches to manual mode as
default. Select the red colour setting
(OptiGrill Elite: 270°C).
6. Start preheating the appliance by
pressing the OK button.
Mode
manual
270 °C
7. The grill will make a sound to alert
you when the desired temperature
has been reached. The appliance is
ready for use.
270°C
00:00
8. Open the appliance and fill the
bottom plate with a ladle of batter
(do not fill the ladle to the top)
until the top of the small squares
is covered. The drip tray should be
left in case the batter overflows.
When this action is complete, close
the appliance.
EN
9