1. General information 1.1 Information about the instruction manual This instruction manual contains information about the installation, operation and maintenance of the device and should be consulted as an important source of information and reference guide. Awareness of the safety instructions and instructions for use in this manual will ensure the safe and correct use of the device.
1.3 Liability and Warrantees All the information and instructions in this manual take into account standard safety regulations, current levels of technical engineering as well as the expertise and experience we have developed over the years. The instruction manual was translated with all due care and attention. However, we do not accept liability for any translation errors.
2.Safety This section provides an overview of all important safety aspects. In addition every chapter provides precise safety advice for the prevention of dangers which are highlighted by the use of the above mentioned symbols. Furthermore, attention should be paid to all pictograms, markers and labels on the device, which must be kept in a permanent state of legibility.
o Cleaning and maintenance cannot be performed by children younger than 8 years old and must be done under supervision. o Children under the age of 8 years old must be kept away from the device and its power cord. o Please keep these instructions and give them to future owners of the device.
3. Transport, packaging and storage 3.1 Delivery check Please check the delivery upon completeness and transport damage immediately after receipt. In case of visible damage do not accept or accept the delivery with reservation only. Note the extent of damage on the carrier’s bill of delivery. Trigger off the complaint. Hidden damages should be reclaimed immediately after notice, as claims for damages can only be asserted within the effective period for complaints.
4. Technical data 4.1 Technical specification Name Warming plate A190102 Code-No.: Material: Stainless steel 2 hot plates, separately controllable, Design: utility space Ø 110 mm each Power: 120 W / 230 V 50 Hz Dimensions: W 358 x D 218 x H 80 mm...
5. Installation and operation 5.1 Safety instructions • Never allow the power cable to come into contact with heat sources or sharp edges. The power cable should not hang over the side of the working surface. Ensure that no one can step on or trip over the cable. •...
5.2 Installation and connection • Unpack the device and remove all packing material. • Put the device in a safe place that can support its weight and is not heat sensitive. • Never place the device at the edge of a table to avoid accidents. •...
5.3 Operation • Before using the device, clean it in accordance with the instructions contained in 6.2 „Cleaning“. • Connect the device to an individual, earthed mains outlet. • Place the pots with the warm coffee or tea onto the provided heater plates. Each heater plate can be switched on and off with a separate toggle switch.
6. Cleaning and maintenance 6.1 Safety advice o Before beginning with repair or cleaning works make sure the device has been disconnected from power supply and has cooled down. o Do not use any acid agents and make sure no water ingresses the device. o To protect yourself from electric shock, never immerse the device, its cables and the plug in water or other liquids.
NOTE! For the disposal of the device please consider and act according to the national and local rules and regulations. Bartscher GmbH Franz-Kleine-Str. 28 D-33154 Salzkotten phone: +49 (0) 5258 971-0 Germany fax:...
Need help?
Do you have a question about the A190102 and is the answer not in the manual?
Questions and answers