Yamaha WOLVERINE 2015 Owner's Manual page 69

3
(a)
1. Locknut
2. Spring preload adjusting nut
3. Special wrench
TIP
 A special wrench can be obtained at a
Yamaha dealer to make this adjustment.
 The spring preload setting is determined by
measuring distance A, shown in the illustra-
tion. The shorter distance A is, the higher
the spring preload; the longer distance A is,
the lower the spring preload. With each
complete turn of the adjusting nut, distance
A is changed by 1.5 mm (0.06 in).
Spring preload setting:
1
2
(b)
1. Distance A
3. Tighten the locknut to the specified
4-30
Minimum (soft):
Distance A = 386.0 mm (15.20 in)
Standard:
Distance A = 378.0 mm (14.88 in)
Maximum (hard):
Distance A = 372.0 mm (14.65 in)
torque. NOTICE: Always tighten the
locknut against the adjusting nut, and
then tighten it to the specified torque.
[ECB00082]
1
4