Page 1
OWNER’S MANUAL 3 Year Limited Warranty on tool READ ALL INSTRUCTIONS BEFORE FIRST USE. KEEP THIS MANUAL FOR FUTURE REFERENCE. KEEP AWAY FROM CHILDREN. E114847 Maximum initial battery voltage (measured without a load) JD5033M is 4 volts. Nominal voltage is 3.6 volts. WEAR CSA APPROVED WEAR EAR WEAR FACE...
1248-202 4V MAX RETRACTABLE SCREWDRIVER KIT WARNING Before using this tool or any of its accessories, read this manual and follow all Safety Rules and Operating Instructions. The important precautions, safeguards and instructions appearing in this manual are not meant to cover all possible situations.
Page 4
Product Specifications ......................1 General Safety Warnings .......................2 Eye, Ear, Lung Protection ......................2 Table of Contents ........................3 Power Tool Safety ........................4 Work Area Safety ........................4 Electrical Safety ........................4 Personal Safety ........................4 Power Tool Use and Care ..................... 4 Battery Tool Use and Care ....................
1248-202 4V MAX RETRACTABLE SCREWDRIVER KIT WARNING Read all safety warnings and instructions. Failure to follow the warnings and instructions Save all warnings and instructions for future reference. WORK AREA SAFETY Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Page 6
Maintain power tools. Check for misalignment or binding of moving parts, breakage of have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. battery pack. Under abusive conditions, liquid may be ejected from the battery; avoid contact. seek medical help.
Page 7
1248-202 4V MAX RETRACTABLE SCREWDRIVER KIT WARNING If the lithium-ion battery no longer charges properly or is damaged, the screwdriver must not be discarded as household trash, burned or thrown into water. The screwdriver must be disposed of as hazardous waste in accordance with all municipal requirements.
Page 8
REMOVING A BIT FROM THE BIT STORAGE CARTRIDGE 1. Rotate the cartridge knob (1) until the desired bit is visible in the cartridge window (2) Fig. 2. Fig. 2 Fig. 3 2. Pull outward on the cartridge knob until the bits are fully exposed (Fig. 3). 3.
1248-202 4V MAX RETRACTABLE SCREWDRIVER KIT FORWARD/REVERSE SWITCH 1. To drive screws, press the upper portion of the trigger switch (1) (Fig. 5). 2. To remove screws, press the lower portion of the trigger switch (2). Fig. 5 LED WORK LIGHT The LED work light (1) will automatically turn ON when the trigger switch is activated (Fig.
Page 10
GENERAL DO NOT use solvents when cleaning plastic parts. Plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use a clean cloth to remove dirt, dust, oil, grease etc. WARNING come into contact with plastic parts. They contain chemicals that can damage, weaken or destroy plastic.
Page 11
1248-202 4V MAX RETRACTABLE SCREWDRIVER KIT If this Radley Tool fails due to a defect in material or workmanship within three years from the date of purchase, return it to any Home Hardware store with the original bill of sale for exchange. Two years for battery and charger. This warranty does not include expendable parts including but not limited to blades, brushes, belts and light bulbs.
Need help?
Do you have a question about the 1248-202 and is the answer not in the manual?
Questions and answers