Baby Call; How To Manually Select A Base Station; How To Register An Additional Handset; How To Unregister A Handset - Philips CD4401B User Manual

Note
If a restricted number is dialled, the call will not
be connected.When this happens, the phone
emits an error tone and returns to idle mode.
5.7.4

Baby call

When activated, the Baby Call feature enables
you to dial the selected number by pressing any
key on your handset.This feature is very useful
for direct access to emergency services.
Note
You can enter up to 24 digits for baby call
number.
5.7.4.1 How to activate baby call mode
Press to access the main menu
1
Press / to select ADVANCED SET
2
Press and
3
CALL
Press to select BABY MODE
4
Press and
5
Press to save the settings
6
• The message "BABYCALL ON" will display on
the idle screen.
5.7.4.2 How to deactivate baby call mode
Press and hold
1
has been activated before).
Press / to select OFF
2
Press to save the settings
3
• The message "BABYCALL ON" will disappear
on the idle screen.
5.7.4.3 How to change baby call number
Press to access the main menu
1
Press / to select ADVANCED SET
2
Press and
3
CALL
Press and
4
BABYCALL NR.
Press to enter the number
5
Press to save the settings
6
5.7.5 How to manually select a base
station
One CD440 handset can register up to four
different CD440 base stations.
22
/ to select BABY
/ to select ON
(when Baby Call mode
/ to select BABY
/ to select
Press to access the main menu
1
Scroll / to select ADVANCED SET
2
Press and
3
SELECT
Press and
4
desired base station
Press to confirm
5
5.7.6 How to register an additional
handset
Additional handsets must be registered to the
base station before you can use them. Up to five
handsets can be registered to one base station.
Press to access the main menu
1
Scroll / to select ADVANCED SET
2
Press and
3
REGISTRATION
Press and
4
desired base station
Note
The registered base station is marked with an
asterisk at the rightmost of the display.
Press and enter the 4-digit master PIN
5
when prompted (default master PIN is
0000)
Press and press
6
for more than three seconds at the same
time.
• A beep tone is emitted from the handset to
indicate successful registration and the screen
returns to idle mode.
Note
If the base is found and the PIN is correct, the
unused handset numbers will be assigned
automatically.
If the PIN is incorrect, WRONG PIN! will be
displayed with an error tone, and the handset
returns to idle mode.
If no base is found within a certain period, NO
BASE would be displayed with an error tone,
and the handset returns to idle mode.
5.7.7

How to unregister a handset

Press to access the main menu
1
Press / to select ADVANCED SET
2
/ to select BASE
/ to select your
/ to select
/ to select your
on the base station
Use more of your phone