Download  Print this page

Connect The Base Station; Install Rechargeable Batteries; Place The Handset On The Charging Cradle - Philips CD4401B User Manual

Philips cd4401b: user guide
Hide thumbs

Advertisement

3 Getting started
3.1

Connect the base station

Caution
Avoid placing the base station too close to
large metal objects such as filing cabinets,
radiators or electrical appliances.This can
impair the range and sound quality. Buildings
with thick internal and external walls may
impair transmission of signals to and from the
base.
!
Warning
Power is applied when the power adaptor is
plugged into the unit and connected to the
electricity socket.The only way to power down
the unit is to unplug the power adaptor from
the electricity socket.Therefore, ensure that
the electricity socket is easily accessible.
The power adaptor and the telephone line cord
have to be connected correctly, as incorrect
connection could damage the unit.
Always use the telephone line cord supplied
with the unit. Otherwise, you may not get a dial
tone.
1
Insert the plug of the power cord into the
socket under the base station.
Insert the plug of the line cord into the
2
socket under the base station.
Connect the other end of the line cord to
3
the telephone line socket and the other
10
end of the power cable to the electricity
socket.
Note
The line adaptor may not be attached to the
line cord. In this case, you have to connect the
line adaptor to the line cord first before
plugging the line cord to the line socket.
3.2

Install rechargeable batteries

Your CD440 is supplied with two rechargeable
batteries. Before using the handset, install the
batteries into the handset and fully charged
them up.
Slide out the battery cover
1
Place the batteries as indicated in the
2
battery compartment and replace the
battery cover.
3.3
Place the handset on the charging
cradle
When the battery is fully charged, the talk time
of your phone is approximately 12 hours and
the standby time is approximately 150 hours.
Place the handset on the charging cradle of
1
the base station.
Leave it there until the batteries are fully
2
charged.
When the handset is fully charged,
3
displayed.
is
Getting started

Advertisement

loading

  Also See for Philips CD4401B

  Related Manuals for Philips CD4401B

This manual is also suitable for:

Cd4401b/37Cd4402b/37Cd4402b/17Cd4402bCd440