Table of Contents
Advertisement
USER GUIDE
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE
Cutout Dimensions
PREPARE SITE
Your U-Line product has been designed for either free-
standing or built-in installation. When built-in, your unit
does not require additional air space for top, sides, or
rear. However, the front grille must NOT be obstructed,
and clearance is required for an electrical and water
connection in the rear.
!
CAUTION
Units can NOT be installed behind a closed
cabinet door.
CUTOUT DIMENSIONS
Filler Panel (Not Provided by U-Line) –
Needed to Attach Mounting Flange on Unit
3/4" (19 mm) Minimum
Flange Mounting Area
Preferred location
for electrical outlet
cabinet.
Cutout
Height
7"
(178 mm)
18-7/8"
(479 mm)
4"
(102 mm)
3/4"
14-1/4"
(19 mm)
(362 mm)
Minimum Flange
Cutout Width
Mounting Area
NOTICE
It is extremely important that this unit sits on a
level surface, as it does not have feet levelers. If
it is not level, the ice mold will not fill evenly.
See Electrical
for Power Supply
26" (660 mm)
Minimum
5/8"
(16 mm)
Toe Kick
3/4"
(19 mm)
Minimum Flange
Mounting Area
u-line.com
Cutout Dimensions 1
Advertisement
Table of Contents
