Safety and Instructional Decals
Safety decals and instructions are easily visible to the operator and are located near any area of potential danger.
Replace any decal that is damaged or missing.
1. Push the button on the
side of the handle, then
grip and squeeze the
trigger to engage the rotor.
1. Electric shock hazard
2. Cutting/dismemberment
hazard of foot; auger
3. Cutting/dismemberment
hazard of hand; impeller
114-8985
2. Release the trigger and
safety interlock switch to
disengage the rotor.
114-8987
4. Read the Operator's
Manual.
5. Keep bystanders a safe
distance from the machine.
6. Remove the ignition key
and read the instructions
before servicing or
performing maintenance.
decal114-8985
decal114-8987
3
119-9786
decal119-9786