1. Manuals
  2. Brands
  3. Dru Manuals
  4. Wood stove
  5. Circo RCE G20
  6. Installation manual

Dru Circo RCE G20 Installation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Circo RCE
G20/G25/G25.3 (Natural gas) G31 (Propane)
Installation manual
Store this document in a safe place
EN

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Circo RCE G20 and is the answer not in the manual?

Questions and answers

Related Manuals for Dru Circo RCE G20

Summary of Contents for Dru Circo RCE G20

  • Page 1 Circo RCE G20/G25/G25.3 (Natural gas) G31 (Propane) Installation manual Store this document in a safe place...

  • Page 2: Table Of Contents

    I N S T A L LA T I O N M A N U A L Contents  1. Introduction 2. CE declaration 3. SAFETY 3.1 General 3.2 Regulations 3.3 Precautions/safety instructions during installation 3.4 Second thermocouple safety 3.5 Oxypilot safety 4.

  • Page 3: Introduction

    Please, read and use this installation manual carefully and completely, prior to installing this appliance. If you use the DRU Powervent system® or the DRU Smartvent system®, you must carefully and fully read and use the accompanying installation manual as well, prior to its installation.

  • Page 4: Safety

    CE label, and make sure there is sufficient ventilation of the room where the appliance is installed, according to legislation. Ø If you are installing an appliance with a closed combustion: only use the concentric systems supplied by DRU. Ø If you are installing a free-standing appliance: •...

  • Page 5: Second Thermocouple Safety

    Check whether the appliance is suitable for the type of gas and the gas pressure used at the location. !Caution 5.1.1 Reconstruction to different type of gas If you want to convert this appliance into a different type of gas, please contact DRU's service department and ask what is possible. Reconstructions should only be performed by authorized gas installers.

  • Page 6: Gas Connection

    5.4 Placing a built in appliance (if applicable) Not all DRU built in appliances are supplied with a control hatch. If not included in the delivery, this control hatch is available separately. In case of appliances with closed combustion (type C11/C31) we always recommend using the Dru control hatch.

  • Page 7: Placing The Chimney Breast

    Placing the control hatch section 5.6; • the Dru control hatch is not supplied with all appliances. Nevertheless, we recommend only using a Dru control hatch, if available, exept in the case of B appliances.

  • Page 8: Placing The Control Hatch

    A number of components are placed in the control hatch, such as data plate, gas control, receiver belonging to the ® remote control and, if applicable, the components belonging to the DRU Powervent system Place the control hatch as follows; see Appendix 3, fig. 3 for details: Ø...

  • Page 9: Connection Flue Gas Discharge System

    (see section 5.8.4). • Only use the concentric system supplied by DRU This system has been tested in combination with the !Caution appliance. DRU cannot guarantee a proper and safe operation of other systems and does not accept any responsibility or liability for this;...

  • Page 10: Placing The Concentric System

    I N S T A L LA T I O N M A N U A L The concentric system with wall or roof terminal has to comply with the following conditions: • In appendix 2, table 4 or 5 you can find whether a concentric pipe should be connected and what the minimum vertical length would have to be.

  • Page 11: Connection Existing Chimney

    The surrounding space is used to supply combustion air. The following requirements apply when connecting to an existing chimney: • only allowed when used in combination with the special DRU chimney kit. The installation regulation is also supplied; •...

  • Page 12: Additional Instructions

    I N S T A LL A T I O N M A N U A L 5.9 Additional instructions !Tip It will be easier to reach the gas control, if you remove the front panel 5.9.1 Placing the appliance When placing the appliance, please take the following aspects into account: Ø...

  • Page 13: Glass Pane

    IN S T A LLA TION M A NU A L 5.10 Glass pane • Avoid damaging the pane during removal/placing; !Caution • Avoid/remove fingerprints on the glass pane, as they will burn into the glass. 5.10.1  Removing the glass pane When removing the front glass pane, you should follow the next steps: Ø...

  • Page 14: Restrictor Slide

    I N S T A LL A T I O N M A N U A L 5.11.2 Restrictor slide The restrictor slide (R) is supplied separately (see Appendix 3, Fig. 14). It is mounted as follows: Ø Remove the glass pane as described in section 5.10.1; Ø...

  • Page 15: Connecting The Receiver

    Place the receiver in its intended holder under the appliance or in the control hatch according to Appendix 3, fig. 39. • If you want to use an adapter, only an adapter supplied by DRU will guarantee a proper operation of the receiver. 6.1.1 Placing / replacing the receiver's batteries Follow the procedure below when placing the batteries: Ø...

  • Page 16: Final Inspection

    (e.g. Domotics). For this purpose, there are 4 connection points at the side of the receiver (see Appendix 3, fig. 44). For connecting an external control unit, you will need a “Domotics connection cable for GV60”. Consult DRU's service website. The following contacts are possible: •...

  • Page 17: Ignition Pilot And Main Burner

    IN S T A LLA TION M A NU A L 7.3 Ignition pilot and main burner For igniting the pilot and main burner, see the User Manual, chapter 4, section 4.2, Remote control. 7.3.1 First ignition of the appliance after installation or adjustments !Caution After installation, or after work has been performed, you should ignite the appliance for the first time without the glass window.

  • Page 18: Maintenance

    I N S T A LL A T I O N M A N U A L 8.  Maintenance The appliance must be inspected once per year by a skilled installer in the field of gas-fired heating, and repaired if necessary. Check at least whether the appliance is working properly and safely.

  • Page 19: Delivery

    IN S T A LLA TION M A NU A L 9.     Delivery                                                                                                                               You must explain to the user how to operate the appliance. You must give him/her instructions on putting it in operation, the safety measures, the operation of the remote control and annual maintenance (see the User Manual).

  • Page 20: Appendix 1 Diagnosis Of Malfunctions

    I N S T A L LA T I ON M A N U A L Appendix 1 diagnosis of malfunctions   Fires with electronic ignition, fault finding: Ignition and burning Start 2.10 Do(es) main burner(s) 2.06 Pilot can be lit. 2.08 Does main burner ignite smoothly and across 2.01 Can pilot be lit? Does it stay alight?
  • Page 21 Flames: too high Voltage 0 mV - proper flue terminal used, make - Line pressure. - 2nd couple defective. should be 'DRU'; - Burner pressure. - Cross ligting main burner very slow. - terminal correctly sited on roof or Take actions "Cross lighting too wall relative to obstructions;...
  • Page 22 I N S T A LL A T I O N M A N U A L Malfunction search diagram atmospheric gas-fired heating appliance with electronic ignition: Starting up cycle. Start 1.05 1.01 Does receiver beep? 1.03 Short sound signals, 1 sec after One long 5 second beep, (possibly each other, followed by the preceded by 7 short beeps).

  • Page 23: Appendix 2 Various Tables

    IN S T A LLA TION M A NU A L Appendix 2 Tables Table 1: Parts included with the delivery Part Number Wood set Installation manual User manual Decoration ring Restrictor slide Hexagonal nut M5 Washer 8.4 mm Sealing cap Socket spanner 8 mm Remote control with receiver 9V block battery Penlite battery (AA type)
  • Page 24 2E+3P 2H3P 2EK3P Concentric appliance connection 150/100 Applicable concentric systems DRU LAS ES-E 200/150/100, DRU LAS ES-I 150/100, DRU LAS AG-I 150/100 Flame protection version Pilot flame with thermocouple 2nd thermocouple safety Atmosphere safety Explosion hatch Ventilation hole chimney breast...
  • Page 25 IN S T A LLA TION M A NU A L Table 3: Line-pressure when using G31 Country mbar NL / DK / FI / NO / SE / HU / BA / GR FR / BE / IT / PT / ES / GB / IE Permissibility and conditions concentric system with wall terminal ...
  • Page 26 I N S T A L LA T I ON M A N U A L Table 5: Determining permissibility concentric system G20/G25/ Total number of meters Total no. of meters vertical and/or sloping pipe length G25.3/G31 horiz. pipe length no bends 2 bends 3 bends...

  • Page 27: Appendix 3 Figures

    IN S T A LLA TION M A NU A L Appendix 3 Figures 442,5 38C-1776 38c-1777 /1 Min 40 mm 1x90° Min 500 mm 38C-744q 45° 0 - 3m 1x90° 38C-2307 /1 38C-744F...
  • Page 28 I N S T A LL A T I O N M A N U A L 38c-1779 38c-1778 38c-1780/1...
  • Page 29 IN S T A LLA TION M A NU A L 38c-1781/1 38c-1782 38c-1783...
  • Page 30 I N S T A LL A T I O N M A N U A L 38c-1784 38c-1785...
  • Page 31 IN S T A LLA TION M A NU A L 38c-1786 38c-1787...
  • Page 32 I N S T A LL A T I O N M A N U A L 38P-0265 38P-0266 38p-0022 38p-0023 3 8 P - 0 1 1 3 38P-0273...
  • Page 33 IN S T A LLA TION M A NU A L 38P-0267/0 38P-0268 38P-0269...
  • Page 34 I N S T A LL A T I O N M A N U A L 38P-0270 38P-0271...
  • Page 35 IN S T A LLA TION M A NU A L 38p-0181 38p-0179 SECTION A-A SCALE 1 : 20 38p-0182 38C-1663/0...
  • Page 36 DRU Verwarming B.V. The Netherlands Postbus 1021, NL-6920 BA Duiven Ratio 8, NL-6921 RW Duiven EN ...

This manual is also suitable for:

Circo rce g25Circo rce g25.3Circo rce g31

Table of Contents