ZyXEL Communications PLA5205 User Manual page 44

Figure 29 Adding an Adapter to Your New Network
A
Click Save.
4
• If you do not type the DAK password or type it incorrectly the following pop-up appears. Click
OK and type the DAK Password correctly in the DAK Password field.
Figure 30 Incorrect DAK or No DAK
• If you have correctly entered the DAK Password, click OK on the pop-up.
Figure 31 Correct DAK
The adapter will disappear from the table of your existing network.
5
Figure 32 Adapters on Your Existing Network
Chapter 5 Powerline Network Setup Tutorial
C
PLA Series User's Guide
44
B