Nikon Z 8 Reference Manual page 94

D
High-Temperature Warnings
During video recording, the camera or memory cards may
become hot and a high-temperature warning or memory card high-
temperature warning may appear in the shooting display. Wait for
the camera to cool and the warnings to clear from the display
before handling the camera, battery, or memory cards.
D
Cautions: Photography and Video Recording
You may notice the following in the shooting display. These phenomena will also be visible in any
photos or footage recorded with the camera:
- flicker or banding in scenes lit by such sources as fluorescent, mercury vapor, or sodium lamps,
- distortion during motion (individual subjects such as trains or cars moving at high speed through
the frame may be distorted, or the entire frame may appear distorted when the camera is
panned horizontally),
- jagged edges, color fringing, moiré, or bright spots,
- bright regions or bands in scenes lit by flashing signs and other intermittent light sources or
when the subject is briefly illuminated by a strobe or other bright, momentary light source, or
- flicker when power aperture is used during video recording.
Note that noise (randomly-spaced bright pixels, fog, or lines) and unexpected colors may appear if
you use the X button to zoom in on the view through the lens.
When recording, avoid pointing the camera at the sun or other powerful light sources. Failure to
observe this precaution could result in damage to the camera's internal circuitry.
Tip: Using Display Zoom in Video Mode
The X button can also be used to zoom in on the display in video mode (
Press X during recording to zoom in 50%, 100% (1 : 1), or 200%. To zoom out, press W (Q). Note,
however, that 50% zoom is not available at a frame size of 1920 × 1080.
Zoom is not available during RAW recording (
When viewing videos, you can zoom in on the current frame when playback is paused.
204).
0
94
0 91).
Recording Videos