Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for PCE Instruments PCE-LDC 15
Summary of Contents for PCE Instruments PCE-LDC 15
- Page 1 User Manual PCE-LDC 15 Leak Detector User manuals in various languages (français, italiano, español, português, nederlands, türk, polski, русский, 中文) can be found by using our product search on: www.pce-instruments.com Last change: 8 June 2022 v1.0 © PCE Instruments...
-
Page 2: Table Of Contents
The PCE-LDC 15 ......................6 Overview and application description of the different sensor types ... 7 10 Start-up / Application of the PCE-LDC 15 ........... 7 10.1 Switch on ......................... 7 10.2 Headphone Volume Up / Volume Down ................7 10.3 Sensitivity level......................... -
Page 3: Safety Notes
• Interventions on the device of any kind, unless they correspond to the intended and described procedures, lead to the expiration of warranty and to the disclaimer. • The device is intended solely for the described purpose. © PCE Instruments... -
Page 4: Use Of Class 2 Laser
Nor for consequential damages connection with delivery, performance this device. The following accumulator is contained in this electrical appliance Battery type Chemical system Accumulator LiIon 2S1P © PCE Instruments... - Page 5 Warning: Make sure that the battery is completely empty. Removing the battery cover Disconnecting the connector Carefully pull out the battery • Carefully remove the accumulator • The accumulator and the appliance can now be disposed of separately © PCE Instruments...
-
Page 6: Intended Use
Pollution degree Protection class IP20 Delivery contents 1 x PCE-LDC 15, 1 x carrying case, 1 x mains adaptor, 1 x focus tube with focus tip, 1 x acoustic trumpet, 1 x headphones, 1 x user manual © PCE Instruments... -
Page 7: Identification
Identification Name plate PCE-LDC 15 Laser warning label Laser 2 Acccording IEC 60825-1:2014 Max. output power: <1mW @ 630-660nm Complies with 21 CFR 1040.10 and 1040.11except for conformance with IEC 60825-1 Ed.3., as described in Laser Notice No. 56, dated May 8,2019... -
Page 8: Device Description
Device description The PCE-LDC 15 Acoustic trumpet USB connection 3.5" TFT colour display with touch panel USB connection On/Off button Laser On/Off button Volume (+/-) 35 mm jack for the headphones © PCE Instruments... -
Page 9: Overview And Application Description Of The Different Sensor Types
Leakage freely accessible Pipes and components to be inspected are very close together Start-up / Application of the PCE-LDC 15 10.1 Switch on Hold down the power button for about 1 second, the power will turn on, and a start-up sequence will appear on the display. -
Page 10: Sensitivity Level
Sensitivity level Ultrasound levels can be understood as a "loudness" of the leakage. With the “Sensitivity" button, the sensitivity of the PCE-LDC 15 can be adjusted to the environment, which strongly influences the acoustic behaviour of the device and increases or decreases the valid value range. -
Page 11: Operation
The selection of the respective menu items is done via short "tapping" with the finger or a soft round pen. Attention: Please use no pens or other objects with sharp edges! The foil can be damaged! 11.1 Initialization After switching on the PCE-LDC 15, the initialization takes place and then switch to leakage display. 11.2 Screen The following picture shows and describes the display elements. -
Page 12: Settings Menu
Before the leakage search is started, the device must be configured. The user can access the menu by clicking the "Settings" button. The following figure shows the “Settings”-Menu. Settings: With the button „Settings“ you access the basic menu of the PCE- LDC 15. Return to measurement by pressing „Back“ –button. © PCE Instruments... - Page 13 11.3.1 Language Here you can select one of 13 languages for the PCE-LDC 15. For languages on page 2 please press 11.3.2 Time & Date By pushing the Time Zone description field and enter the correct UTC, you can set the correct time all over the world.
- Page 14 11.3.3.1 System update If required, there is the possibility for the PCE-LDC 15 to download a firmware update to the device via the USB stick. The received file must then be stored on the USB stick and transferred to your device as described below.
- Page 15 „Yes“. Note: Saved data are not deleted or overwritten. If needed with „Reboot System“ the PCE- LDC 15 could be started (reboot) here. © PCE Instruments...
- Page 16 Is this not the case, so you can repeat the calibration with the help of the Cancel Calibrate button. 11.3.5 Backlight brightness Here you adjust the desired Backlight (15-100%) of the display directly. E. g. Backlight to 39 % © PCE Instruments...
- Page 17 If one minute is not enough time to clean, the process can be repeated at any time. Is the cleaning faster finished, then you can push the to abort press long button (for one or two seconds) to cancel. © PCE Instruments...
-
Page 18: Charging The Battery
The PCE-LDC 15 checks the charging status of the battery and starts the charging process automatically if necessary. To protect the Li-ION accumulator of exhaustive discharge the device is switching off automatically if a cell voltage of 6.4 V will be reached. -
Page 19: Warranty
For countries outside the EU, batteries and devices should be disposed of in accordance with your local waste regulations. If you have any questions, please contact PCE Instruments. © PCE Instruments... - Page 20 PCE Instruments contact information Germany France Spain PCE Deutschland GmbH PCE Instruments France EURL PCE Ibérica S.L. Im Langel 26 23, rue de Strasbourg Calle Mayor, 53 D-59872 Meschede 67250 Soultz-Sous-Forets 02500 Tobarra (Albacete) Deutschland France España Tel.: +49 (0) 2903 976 99 0 Téléphone: +33 (0) 972 3537 17...
Need help?
Do you have a question about the PCE-LDC 15 and is the answer not in the manual?
Questions and answers