1. Manuals
  2. Brands
  3. Smartsafe Tech Manuals
  4. Diagnostic Equipment
  5. iSmartLink D01
  6. User manual

Smartsafe Tech iSmartLink D01 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
www.newsmartsafe.com
iSmartLink D01 User Manual
Copyright Information
Copyright © 2021 by SHENZHEN SMARTSAFE TECH CO.,LTD. All rights
reserved. No part of this publication may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording or otherwise, without the prior written permission of
SMARTSAFE.
Neither SMARTSAFE nor its affiliates shall be liable to the purchaser of this
unit or third parties for damages, losses, costs, or expenses incurred by
purchaser or third parties as a result of: Accident, misuse, or abuse of this
unit, or unauthorized modifications, repairs, or alterations to this unit, or
failure to strictly comply with SMARTSAFE operating and maintenance
instructions. SMARTSAFE shall not be liable for any damages or problems
arising from the use of any options or any consumable products other than
those designated as Original SMARTSAFE Products or SMARTSAFE
Approved Products by SMARTSAFE.
All information, specifications and illustrations in this manual are based on
the latest information available at the time of printing. SMARTSAFE reserves
the right to make changes at any time without prior written or oral notice.
Trademark Information
is a registered trademark of SHENZHEN SMARTSAFE TECH
CO., LTD. in China and other countries. All other SMARTSAFE trademarks,
service marks, domain names, logos, and company names referred to in this
manual are either trademarks, registered trademarks, service marks, domain
names, logos, company names of SMARTSAFE or are otherwise the
property of SMARTSAFE or its affiliates. In countries where any of the
SMARTSAFE trademarks, service marks, domain names, logos and
company names are not registered, SMARTSAFE claims other rights
associated with unregistered trademarks, service marks, domain names,
logos, and company names. Other products or company names referred to
in this manual may be trademarks of their respective owners. You may not
use any trademark, service mark, domain name, logo, or company name of
SMARTSAFE or any third party without permission from the owner of the
applicable trademark, service mark, domain name, logo, or company name.
You
may
contact
SMARTSAFE
by
visiting
the
website
at
I

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the iSmartLink D01 and is the answer not in the manual?

Questions and answers

Related Manuals for Smartsafe Tech iSmartLink D01

Summary of Contents for Smartsafe Tech iSmartLink D01

  • Page 1 D01 User Manual Copyright Information Copyright © 2021 by SHENZHEN SMARTSAFE TECH CO.,LTD. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of SMARTSAFE.
  • Page 2 D01 User Manual www.newsmartsafe.com www.newsmartsafe.com, or writing to SHENZHEN SMARTSAFE TECH CO., LTD., 3310, Building 11, Tianan Cloud Park, Bantian Street, Longgang District, Shenzhen, Guangdong, China, to request written permission to use Materials on this manual for purposes or for all other questions relating to this manual.
  • Page 3 D01 User Manual designated by the Company. 10. Keep the testing equipment dry and clean, away from gasoline, water and grease. When necessary, clean the surface of the equipment with a clean cloth coated with a mild detergent.

  • Page 4: Table Of Contents

    Contents 1. Packing List ....................1 2. Product Introduction ................3 2.1 Overview ....................3 2.2 iSmartLink D01 ..................3 2.3 iSmartBOX ..................... 5 2.4 Technical Parameters ................6 3. Initial Use ....................7 3.1 Charge the Tablet .................. 7 3.2 Turn On/Off ....................
  • Page 5 D01 User Manual 8.4 Steering Angle Calibration ..............53 8.5 Battery Maintenance System Reset .............54 8.6 ABS Bleeding ..................54 8.7 Throttle Learning ..................54 8.8 Tire Pressure Monitor System Reset ........... 55 8.9 Diesel Particulate Filter (DPF) Regeneration ........55 8.10 Gearbox Matching ................55...
  • Page 6 D01 User Manual www.newsmartsafe.com 9. Reports ....................59 10. Update ....................61 10.1 Update ....................61 10.2 Renew Subscription ................62 11. Remote Diagnose ................. 63 11.1 Messages ...................63 11.2 Contacts .....................63 11.3 Remote ....................64 12. Feedback ....................65 13.
  • Page 7 D01 User Manual 15.2 Activate VCI ..................70 15.3 Firmware Fix ..................71 15.4 Data Sample ..................71 15.5 Comprehensive Inspection Reports ...........71 15.6 Profile ....................72 15.7 Subscription Renewal Card ............... 73 15.8 Units ....................73 15.9 Diagnostic Software Clear ..............74 15.10 About ....................74...

  • Page 9: Packing List

    D01 User Manual 1. Packing List The following accessories are for reference only. Please consult from the local agency or check the package list supplied with this tool together. Main Unit and Accessories Name Q'TY Reference Picture iSmartLink D01...
  • Page 10 D01 User Manual www.newsmartsafe.com USB Cable （Type-C） USB Cable （Type-B） Switching Power Supply (12V 5A) Password Envelop Quick Reference Guide User Manual Packing List...

  • Page 11: Product Introduction

    Note: By default, the ADAS calibration function is disabled. To ensure normal use of the calibration function, users need to activate the pin card (included with the Calibration Tool) to unlock it on the LINK first. iSmartLink D01 is mainly composed of the main unit and iSmartBOX. 2.2 iSmartLink D01...
  • Page 12 D01 User Manual www.newsmartsafe.com Name and Description 10.1-inch Touch Screen Front Facing Camera Power Indicator Light Red during charging and green after fully charged. Handle Volume - Volume+ Power Button/Screen Lock Button • Press the button for about 3 seconds to start the machine when the power is off.

  • Page 13: Ismartbox

    D01 User Manual • Used for connecting to power adapter for charging or connecting to computer for data transmission. USB Type-A • Used for connecting to USB devices or function expansion modules. Flash Light Rear Camera Holder Loudspeaker 2.3 iSmartBOX...

  • Page 14: Technical Parameters

    D01 User Manual www.newsmartsafe.com Vehicle Communication Indicator Power Supply Indicator OBD-II Port 2.4 Technical Parameters 2.4.1 iSmartLink D01 Item Specification Parameters Operation System Android 8-core Processor, 2.0GHz Internal Storage Storage 128GB Display Screen 10.1 inch Touch Screen，1920x1200 Resolution Front Facing Camera...

  • Page 15: Initial Use

    Please follow the following steps to charge the iSmartLink D01 tablet: 1. Connect one end of the charging cable to the USB port on the charger and the other end to the Type-C port on the host, and connect the charger to the power socket.

  • Page 16: Turn On/Off

    D01 User Manual www.newsmartsafe.com 3.2 Turn On/Off 3.2.1 Turn On Press and hold the power button on the device until the screen lights up. 3.2.2 Turn Off Press and hold the power button on the device until the shutdown prompt dialog box pops up on the screen, tap Power off to shut down the device or tap Restart to restart the device.
  • Page 17 D01 User Manual Create an Account Activate VCI Finish Registration Software Update Note: Before registration, ensure that the network connection to the host is normal and stable. On the main interface, tap Personal Center -> Login, and the following dialog box will pop up: (If you are a new user, follow Section A.)
  • Page 18 D01 User Manual www.newsmartsafe.com In the figure above, fill in the registration information in turn (the item with * is required). After the account information is filled in, tap Register, and the system will enter the interface of connector activation.
  • Page 19 D01 User Manual Note: If you skip the activation step here, you can also go to Personal Center -> Activate VCI to activate after entering. Tap Activate to complete the registration. Tap OK to enter the software update interface.

  • Page 20: Getting Started

    4. Getting Started 4.1 Main Interface and Bottom Navigation Bar 4.1.1 Main interface The main interface of iSmartLink D01 mainly includes the following functions modules: Items Description This module works with the specified ADAS calibration tool ADAS Calibration (purchased separately, e.g., ADAS Mobile) for ADAS (Advanced...

  • Page 21: Preparation And Vehicle Connection

    D01 User Manual Update Use this function to update vehicle diagnostic software and APK. The function module is used to remotely assist the user to Remote Diagnose diagnose the vehicle. The function is used to report the problems (the last 20 test Feedback records) back to us.

  • Page 22: Communication Settings

    D01 User Manual www.newsmartsafe.com  The vehicle ignition is turned on.  The vehicle battery voltage range is 11~14 volts or 23~26 volts.  The throttle is in the closed position. Find DLC position: The DLC (Data Link Connector) is usually located 12 inches from the center of the instrument panel, under or around the driver’s...

  • Page 23: Adas Calibration

    D01 User Manual automatically match with the VCI connector and establishes a Wi-Fi connection. At this time the VCI connector icon at the bottom of the screen lights up and the Wi-Fi indicator of the VCI connector is also on.

  • Page 24: Adas Calibration Conditions

    D01 User Manual www.newsmartsafe.com (3) Scrape the coating area of the ADAS activation card to display the activation code. Enter the 24-digit activation code, and then tap Activate to activate the ADAS function. (4) After successful activation, the calibration function of ADAS can be used normally.

  • Page 25: Calibration Operation

    D01 User Manual 5.2.2 Workstation Requirements To make you work smoothly and calibrate accurately, please make sure the following workstation requirements are met. Make sure the vehicle is parked with all wheels on an even floor surface. •...
  • Page 26 D01 User Manual www.newsmartsafe.com Tap VW (take VW as an example), the following screen will appear: Note: Different vehicle has different diagnostic menus. 5.3.1 ADAS System Select This function allows you to select the desired ADAS system to perform...
  • Page 27 D01 User Manual 5.3.2 ADAS System Scan Use this function to scan which ADAS systems are installed on the test vehicle. The ADAS systems can be displayed in form of topology or list. Tap Start Scanning to start reading DTCs. After scanning is complete, tap the system displayed in red to view the existing DTCs, or tap the system functioning normally to perform other diagnostic functions.
  • Page 28 D01 User Manual www.newsmartsafe.com Tap ADAS Calibration Function tab, the following screen will appear: Tap the desired calibration item (Take Front Camera Calibration for example), the following screen will appear: Tap A5 Front Sensors Driver Assistance System, the following screen will...
  • Page 29 D01 User Manual Tap the desired ADAS calibration tool (Take ADAS Mobile for example) to go to the next step. Carefully check the calibration notes and pre-calibration preparation. Swipe the screen from the bottom to view the hidden text if necessary.
  • Page 30 D01 User Manual www.newsmartsafe.com Tap Calibration to start calibrating. Tap Continue/Complete to continue. Tap Continue/Complete to start writing data.
  • Page 31 D01 User Manual Follow the on-screen instructions to measure the height H (from the tire contact surface to the wheel housing edge) of each wheel respectively, and input the actual measured values. After inputting all measured values, tap OK to continue.
  • Page 32 D01 User Manual www.newsmartsafe.com Switch the ignition off, tap Continue/Complete to continue. Switch the ignition on again, tap Continue/Complete to code the driver assistance systems front camera data into the vehicle’s ECU. After successfully coding the front camera, tap Continue/Complete to continue.

  • Page 33: Immo Matching

    D01 User Manual modules of the vehicle and check whether the DTCs related to the ADAS systems has been cleared or not. 6. IMMO Matching This function enables you to perform the anti-theft key matching function, so that the immobilizer control system on the car identifies and authorizes remote control keys to normally use the car.
  • Page 34 D01 User Manual www.newsmartsafe.com 6.1.2 Operations Here we take the BMW for example to demonstrate how to perform the functions of key adding and all lost for BMW CAS4/CAS4 + anti-theft system module. Tap IMMO Matching on the main interface and select BMW as the vehicle brand.
  • Page 35 D01 User Manual If not sure about the type of anti-theft system, tap Automatic Detection. The IMMO type will be automatically identified , then tap OK. Tap Preprocessing to perform Read anti-theft data, Key matching and more. If it has already been preprocessed, here you can perform the relevant functions.
  • Page 36 D01 User Manual www.newsmartsafe.com After preprocessing, tap OK. Return to the function menu page and tap Key Learning. After the key information successfully read, select the unused key position and tap Key Generated By Ignition Switch.
  • Page 37 D01 User Manual Read and display the secret key, and tap OK. Place a new key close to vehicle coil, tap OK, and wait for key generation.

  • Page 38: Immo Prog

    D01 User Manual www.newsmartsafe.com After the dealer key is successfully generated, please try to start the vehicle. Now the key matching is finished and the new key is ready for use. 6.2 IMMO PROG The iSmartIMMO G3 is required when performing this operation. It has the following functions: •Read transponder data (including Mercedes Benz infrared smart key), and...
  • Page 39 D01 User Manual to supply power to the iSmartIMMO G3. Obtaining power through a connection to the DC power jack of the iSmartIMMO G3 via the switching power supply alone is failed. Tap IMMO PROG. Check that the VCI, vehicle and iSmartIMMO G3 are correctly connected according to the prompts in the software picture, and then tap OK.
  • Page 40 D01 User Manual www.newsmartsafe.com 2. Select Engine Brand (e.g. Bosch). Select Engine series (e.g. MED17). Tap Search For ECU Model. 5. Check ECU model (printed on the sticker on the back of your Engine),...
  • Page 41 D01 User Manual enter the engine type in the dialogue box (for example , the engine type should be MED17.7.7) and tap OK. 6. Tap OK to confirm the engine type and enter the function selection screen. Note: The function selection screen varies by different vehicle manufacturers.
  • Page 42 D01 User Manual www.newsmartsafe.com D. BENCH mode cable (optional) E. Adaptor cable (optional) associated with the BENCH mode cable F. Engine b.Tap Backup EEPROM data to create a file name and save it on the tablet. c.Tap Restore EEPROM data to write the backup EEPROM data into the new engine.
  • Page 43 D01 User Manual them into the gearbox ECU for replacement. Situation 2 - The data of the original vehicle gearbox ECU is unreadable or the data is damaged. In this case, we need to back up the EEPROM of the ECU for replacement, and then manually input the original CS code or get the original CS code from the original key.
  • Page 44 D01 User Manual www.newsmartsafe.com D. BENCH mode cable (optional) E. Adaptor cable (optional) for the BENCH mode cable G. Gearbox ECU Tap Connect to read the chip ID of the original car gearbox. Tap Backup EEPROM Data to read the EEPROM data of the original car gearbox and then enter the new file name to save it on the tablet.
  • Page 45 D01 User Manual Tap Restore FLASH Data to write the FLASH data of the original vehicle gearbox backed up in step 6 into the new gearbox ECU. Situation 2: Tap Gearbox. Select Gearbox type according to the specific model, here we choose DQ200- MQB (take this as an example) to enter the function selection screen.
  • Page 46 D01 User Manual www.newsmartsafe.com D. BENCH mode cable (optional) E. Adaptor cable (optional) for the BENCH mode cable G. Gearbox ECU Tap Connect to read the chip ID of the original car gearbox. Tap Backup EEPROM Data to read the EEPROM data of the original car gearbox and then enter the new file name to save it on the tablet.
  • Page 47 D01 User Manual Replacement Of Parts -> Transmission, tap OK. Tap YES to enter the gearbox replacement screen.
  • Page 48 D01 User Manual www.newsmartsafe.com When replacing the transmission ECU, two groups of anti-theft data are required: Anti-theft data of transmission engine (backed up in step 5) • Anti-theft data of the target vehicle • Select Edit1, tap NO, tap Obtain From EEPROM Data, select...
  • Page 49 D01 User Manual Tap Edit2, if you have obtained the relevant data of the original vehicle gearbox from other equipment, select Manual Input Data and enter the 16-byte CS code of the original vehicle gearbox. Note: If there is no anti-theft data of the target vehicle, select Original Vehicle Key Obtained, put the original vehicle key in the iSmartIMMO G3, and just follow the prompts to obtain it, no need to enter any data to complete the replacement.

  • Page 50: Diagnose

    D01 User Manual www.newsmartsafe.com Note: If Original Vehicle Key Obtained is selected in step 9, the vehicle’s VIN code, power level and CS code in this step will be automatically obtained. The user is not required to enter any data to complete the replacement.

  • Page 51: Manual Selection

    D01 User Manual Some models may not be able to identify the vehicle information through the intelligent detection function. In this case, the following dialog box will pop up for the user to scan or manually input the vehicle VIN code.
  • Page 52 D01 User Manual www.newsmartsafe.com 2. Click the vehicle brand to be tested to enter the model version information interface. Here we take Demo (Version 15.42) as an example to demonstrate how to diagnose a vehicle. Screen Button Description: Click to view the updated points of the current diagnostic What’s new...
  • Page 53 D01 User Manual 4. Select the scan option that need to perform. The system supports two display modes: topological diagram and list. User can also tap ADAS Calibration to perform ADAS related test options of vehicles . Note: The specific system and special functions provided depend on the vehicle type.
  • Page 54 D01 User Manual www.newsmartsafe.com The system with fault codes will be displayed with red background, and the specific number of fault codes will be displayed. Click on a single system to view specific fault information. No fault system will be displayed with green background.
  • Page 55 D01 User Manual saving reports. By comparison, maintenance technicians can clearly understand whether the fault codes found before diagnosis have been completely cleared after maintenance. Enter the shop name and then tap OK to enter the report details view page.
  • Page 56 D01 User Manual www.newsmartsafe.com The user can manually select the vehicle electronic control system to perform the test function operation. Click a single electronic control system (such as "ECM") in the test option selection interface, and then tap Enter to go to the test function selection page.
  • Page 57 D01 User Manual Warning: Reading a diagnostic trouble code while troubleshooting a vehicle is only a small step in the diagnostic process. The vehicle DTC is only used as a reference, and parts cannot be replaced directly on the basis of the given DTC definition. Each DTC has a set of test procedures, and the maintenance technician must strictly follow the operating instructions and procedures described in the vehicle maintenance manual to confirm the root of the fault.
  • Page 58 D01 User Manual www.newsmartsafe.com sequence: read the fault code first, then clear the fault code in the test run, read the fault code again for verification, repair the vehicle, clear the fault code, and confirm the fault code does not appear in the test run again.
  • Page 59 D01 User Manual Note: 1. Click , the left popup will appear on the screen: Users can set different display styles for each data stream option according to personal preferences. B Indicates that the current data stream will be displayed in bold.
  • Page 60 D01 User Manual www.newsmartsafe.com Note: The waveform can be zoomed in or out. Tap the screen with two fingers (thumb and index finger, for example), then slide the fingers to adjust the distance between the fingers to zoom in and out of the screen.

  • Page 61: Special Functions

    D01 User Manual 8. Special Functions This module provides the quick entry for commonly used special function operation, including A/F Reset, Brake Reset, maintenance lamp returns to zero, steering angle learning, battery replacement, ABS exhaust, throttle learning, tire pressure reset, DPF regeneration, wave case learning, gear...

  • Page 62: Battery Maintenance System Reset

    D01 User Manual www.newsmartsafe.com four-wheel alignment, or recovering car body. 8.5 Battery Maintenance System Reset This function enables you to perform a resetting operation on the monitoring unit of vehicle battery, in which the original low battery fault information will be cleared and battery matching will be done.

  • Page 63: Tire Pressure Monitor System Reset

    D01 User Manual potentiometer have not changed, but under the same throttle opening, the air intake has changed, and the idle control characteristics have changed. At this time, it is necessary to match the throttle. 8.8 Tire Pressure Monitor System Reset This function enables you to quickly look up the tire sensor IDs from the vehicle’s ECU, reset tire pressure and turn off the tire pressure MIL.

  • Page 64: Motor Angle Calibration

    D01 User Manual www.newsmartsafe.com It needs to be performed in the following cases: 1) After the engine ECU, crankshaft position sensor, or crankshaft flywheel is replaced. 2) The DTC 'tooth not learned' is present. 8.12 Motor Angle Calibration When the rotor position detected by the motor angle position sensor is different from the actual rotor field position, motor angle calibration must be performed.

  • Page 65: Transport Mode

    D01 User Manual engine output power is reduced. In this case, the GPF replacement or regeneration must be performed. 8.19 Transport Mode In order to reduce power consumption, the following functions may be disabled, including limiting the vehicle speed, not waking up the door opening network, and disabling the remote control key, etc.

  • Page 66: Sunroof Initialization

    D01 User Manual www.newsmartsafe.com This function is used to open or close the automatic start-stop function via setting the hidden function in ECU (provided that the vehicle has a hidden function and supported by hardware). 8.26 Sunroof Initialization This function enables you to set the sunroof lock off, closed when it rains, sliding / tilting sunroof memory function, temperature threshold outside the car etc.

  • Page 67: Egr Learning

    D01 User Manual automatically according to the environmental light intensity, and monitor the vehicle's speed and body posture, and adjust the lighting angle of the headlamp timely. 8.33 EGR Learning This function is used for learning after EGR (Exhaust Gas Recirculation) valve cleaning or replacement.
  • Page 68 D01 User Manual www.newsmartsafe.com If the detected data is recorded on the read data stream screen, the detected data is displayed in the Recorded Data tab. Tap the test record to be played back to enter the following screen:...

  • Page 69: Update

    D01 User Manual If the diagnosis report is saved during remote diagnose, the report will be displayed under the Remote Reports tab. 10. Update When a new model is added or a new version of software is available, the system will prompt the user to update.

  • Page 70: Renew Subscription

    D01 User Manual www.newsmartsafe.com software. You can view the software version, installation package size, and software update content on this interface. 10.2 Renew Subscription If the software subscription is due or expires, the system will prompt you to renew your subscription.

  • Page 71: Remote Diagnose

    D01 User Manual 11. Remote Diagnose The module is used to remotely assist users in diagnosis operations. Tap Remote Diagnose to enter the following page: 11.1 Messages Tap Messages to enter the messages page, here you can see all the messages received.

  • Page 72: Remote

    D01 User Manual www.newsmartsafe.com Enter “Username/Nickname/Serial Number” in the search bar to search and add a friend. The added friends will appear in the contacts list. Select the maintenance technician in the list to enter the interactive page. In the interactive page, you can communicate with text and voice messages, send files and pictures, invite remote diagnose assistance, etc.

  • Page 73: Feedback

    D01 User Manual 12. Feedback If an unsolvable problem or diagnostic software problem is encountered during diagnosis, the user can report the problem (the last 20 test records) back to us. After receiving your feedback, we will follow up and deal with it in time, so as to improve our product quality and user experience.

  • Page 74: Toolbox

    Each module basically consists of two parts: hardware and software. The APPs of these modules are integrated on the iSmartLink D01, and these APPs need to work with the corresponding compatible hardware (optional). 13.1 Tyre Tread Depth Measuring...

  • Page 75: Setting

    D01 User Manual This functional module needs to work with videoscope equipment (optional), which can detect invisible or inaccessible parts in the engine, fuel tank and brake system. For specific operations, please refer to the product user manual attached with the videoscope device.

  • Page 76: Battery

    D01 User Manual www.newsmartsafe.com 14.4 Battery Used to view the App power usage and enable the power saving mode of the device. 14.5 Display Used to set and adjust device display parameters. 14.5.1 Brightness 1. On the main interface, tap Settings -> Display -> Brightness Level.

  • Page 77: Location

    D01 User Manual It is used to manage device privacy rights. This includes the permission for an App to access device data, whether characters are displayed briefly when entering a password, and whether notifications are displayed when the screen is locked.

  • Page 78: Personal Center

    D01 User Manual www.newsmartsafe.com Note: Keep the USB switch ON when the device uses Wi-Fi for wireless diagnosis. 15. Personal center 15.1 VCI This option allows you to manage all your activated VCI devices 15.2 Activate VCI This item lets you activate the VCI connector in case you ignore the Activate VCI step in process of the product sign-up.

  • Page 79: Firmware Fix

    D01 User Manual 15.3 Firmware Fix Use this item to upgrade and fix diagnostic firmware. During fixing, please do not cut power or switch to other interfaces. 15.4 Data Sample Used to manage the recorded data stream sample files.

  • Page 80: Profile

    D01 User Manual www.newsmartsafe.com Tap Report to view and share the generated comprehensive inspection report. Note: To generate the test reports of different devices into a comprehensive inspection report, please enter the same maintenance number when saving the test reports of different devices.

  • Page 81: Subscription Renewal Card

    D01 User Manual 15.7 Subscription Renewal Card This item is used to check the status of the subscription renewal card. 15.8 Units It is designed to configure the measurement unit. Metric System and English System are available.

  • Page 82: Diagnostic Software Clear

    D01 User Manual www.newsmartsafe.com 15.9 Diagnostic Software Clear This item allows you to hide/clear the diagnostic software that is not frequently used. Note: Removing software may completely delete the software from the tool. If some software is not used and the tool runs out of space, you can use this feature to remove it.

  • Page 83: Other

    D01 User Manual 16. Other 16.1 E-mail This module is used to receive and send e-mail. 16.2 Gallery This feature can be used to take photos, videos and manage galleries (including screenshots). 16.3 Recording Master A simple-to-use, convenient and quick screen recording software. Support recording screen playback, GIF animation and sharing functions.

  • Page 84: Browser

    D01 User Manual www.newsmartsafe.com Send your ID to the other party. After the other party enters your ID in TeamViewer, tap Connect to Partner to remotely control your device. 16.7 Browser This module can be used to browse the web.
  • Page 85 The vehicle battery itself has a serious power deficit. The detection connector is damaged. How to reset the iSmartLink D01 tablet? Please reset the device according to the following procedures: On the home screen, tap Settings -> System -> Reset Options.
  • Page 86 D01 User Manual www.newsmartsafe.com ensure that important data has been backed up.

  • Page 87: Fcc Warnning

    D01 User Manual FCC Warnning Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to...

  • Page 88: Warranty

    D01 User Manual www.newsmartsafe.com Warranty THIS WARRANTY IS EXPRESSLY LIMITED TO PERSONS WHO PURCHASE SMARTSAFE PRODUCTS FOR PURPOSES OF RESALE OR USE IN THE ORDINARY COURSE OF THE BUYER’S BUSINESS. SMARTSAFE electronic product is warranted against defects in materials and workmanship for one year from date of delivery to the user.

Table of Contents