1. Manuals
  2. Brands
  3. Smartsafe Tech Manuals
  4. Diagnostic Equipment
  5. iSmartTool Series
  6. User manual

Smartsafe Tech iSmartTool Series User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Version: V1.00.000
Revised date: 08-26-2021

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the iSmartTool Series and is the answer not in the manual?

Questions and answers

Related Manuals for Smartsafe Tech iSmartTool Series

Summary of Contents for Smartsafe Tech iSmartTool Series

  • Page 1 Version: V1.00.000 Revised date: 08-26-2021...
  • Page 2 Series User Manual Copyright Information Copyright © 2021 by SHENZHEN SMARTSAFE TECH CO.,LTD. (also called SMARTSAFE for short). All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying and recording or otherwise, without the prior written permission.
  • Page 3 Series User Manual Important Safety Precautions To avoid personal injury, property damage, or accidental damage to the product, read all of the information in this section before using the tool. DANGER • When an engine is operating, keep the service area well-ventilated or attach a building exhaust removal system to the engine exhaust system.
  • Page 4 Series User Manual  Automotive batteries contain sulfuric acid that is harmful to skin. In operation, direct contact with the automotive batteries should be avoided. Keep the ignition sources away from the battery at all times.  Keep the tool dry, clean, free from oil, water or grease. Use a mild detergent on a clean cloth to clear the outside of the equipment when necessary.

  • Page 5: Table Of Contents

    Series User Manual Table of Contents 1 Introduction......................1 1.1 P ....................1 ACKAGE 1.2 C & C ................... 4 OMPONENTS ONTROLS 1.3 T ..................5 ECHNICAL ARAMETERS 2 Initial Use......................6 2.1 C & T .................. 6 HARGING URNING 2.2 P...
  • Page 6 Series User Manual 6.4 ABS B ....................28 LEEDING 6.5 T ............28 RESSURE ONITOR YSTEM ESET 6.6 G ....................28 EARNING 6.7 IMMO S ....................28 ERVICE 6.8 I ................... 29 NJECTOR ODING 6.9 B .............. 29 ATTERY...
  • Page 7 Series User Manual 9.8 D ................33 IAGNOSTIC OFTWARE LEAR 9.9 S ....................... 34 ETTINGS 10 FAQ........................35...

  • Page 8: Introduction

    Series User Manual 1 Introduction 1.1 Package List Common accessories are same, but for different destinations, the accessories may vary. The following accessories are for reference only. Please consult from the local agency or check the package list supplied with this tool together.
  • Page 9 Series User Manual For iSmartTool 601BT Item Descriptions iSmartTool 601BT Indicate the test result. tool Collect the tool to the vehicle’s DLC Diagnostic cable (Data Link Connector) port. Battery cable Connect the vehicle battery to perform clamps the battery detection.
  • Page 10 Series User Manual A piece of paper bearing the product Password envelope Serial Number and Activation Code for product registration. User manual Instructions on the tool operations. For iSmartTool 601 Item Descriptions iSmartTool 601Max tool Indicate the test result.

  • Page 11: Components & Controls

    Series User Manual 1.2 Components & Controls Connects the diagnostic cable to the POWER key - Press it to turn the vehicle’s DLC (Data Link Connector) tool on/off. port. LCD screen – Indicates the test Circular connector – Connects the results.

  • Page 12: Technical Parameters

    Series User Manual 1.3 Technical Parameters Operating system: Android Memory: 4GB Storage: 32GB Screen: 5.99 inch capacitive touch screen with a resolution of 1440 x 720 pixels Camera: Rear-facing 8.0MP camera Wi-Fi: 2.4GHz/5GHz dual band Connectivity:  DB15 Diagnostic connector ...

  • Page 13: Initial Use

    Series User Manual 2 Initial Use 2.1 Charging & Turning On 1. Plug one end of the included USB cable into the USB Type C port of the tool, and the other end to the DC external power adaptor.

  • Page 14: Basic Operations

    Series User Manual 4. Close the paper cover and press it down until you hear a click. Note: The printer applies the thermal paper, which should be prevented from being heated before printing, otherwise, the paper would be no longer effective or printing results disappear.

  • Page 15: Network Setup

    Series User Manual then release it, the system will change into the target language. 2.5 Network Setup The tool has built-in Wi-Fi that can be used to get online. Once you’re online, you can register your tool, surf the Internet, send email, SMARTSAFE the remote diagnosis, and check for software updates etc.

  • Page 16: Job Menu

    Series User Manual Code (can be obtained from the password envelope), and then tap Activate. 3. Download diagnostic software: Tap OK to enter the update center to download all available software. B. If you have registered to be a member, input your name and password, and then tap Login to enter the main menu screen directly.

  • Page 17: Vehicle Diagnosis

    Series User Manual Reports: Manage the diagnostic report and recorded data. Update: Update vehicle diagnostic software and APK. Tablet setting: Configure the system settings of the tool. Videoscope: Check the unseen or unreachable parts or components. Personal center: Manage personal information; configure system settings of the application and logout etc.

  • Page 18: Vehicle Connection

    Series User Manual A. Opel, Volkswagen, Audi B. Honda C. Volkswagen D. Opel, Volkswagen, Citroen E. Changan F. Hyundai, Daewoo, Kia, Honda, Toyota, Nissan, Mitsubishi, Renault, Opel, BMW, Mercedes-Benz, Mazda, Volkswagen, Audi, GM, Chrysler, Peugeot, Regal, Beijing Jeep, Citroen and other most popular models If the DLC cannot be found, refer to the vehicle’s service manual for the location.

  • Page 19: Start Diagnostics

    Series User Manual adaptor. 3.3 Start Diagnostics Tap a corresponding diagnostic software logo, and then follow the on-screen instruction to access the diagnostic software. Take Demo (Version 15.32) as an example to demonstrate how to diagnose a vehicle. 1).Select diagnostic software version: Tap the DEMO to go to Step 2.
  • Page 20 Series User Manual Explanation of terms: : Back to the Job menu. : Print the content of the current screen. : Exit the current program. Report: Save the current data in text format. Help: View the DTC help information.
  • Page 21 Series User Manual Note: Different vehicle has different diagnostic menus. A. Read Fault Code This function displays the detailed information of DTC records retrieved from the vehicle’s control system. Caution: Retrieving and using DTCs for troubleshooting vehicle operation is only one part of an overall diagnostic strategy.
  • Page 22 Series User Manual Explanation of terms: Freeze Frame: A snapshot of critical parameter values at the time the DTC is set. Help: View the help information. Code Search: Search for more information about the current DTC online. Report: Save the current data in text format. All reports are saved in Test report ->...
  • Page 23 Series User Manual Notes: Tap to set the display style. indicates sticky top. B indicates this item will be displayed in Bold. A indicates this item will be displayed in Red. There are 3 types of display modes available for data viewing, allowing you to view various types of parameters in the most suitable way.

  • Page 24: Feedback

    Series User Manual items and save it as a sample Data Stream file. Save Sample: Save the running parameters as a data stream sample file. Note: Only data stream items with measurement units will be recorded. Report: Tap to save the current data in text format. All reports are saved in Test report ->...

  • Page 25: Battery (Only Applies To Ismarttool 601Bt & Ismarttool 601Max)

    Series User Manual 4 Battery (only applies to iSmartTool 601BT & iSmartTool 601Max) 4.1 Battery Test Battery test is specifically designed to help car owner, repair workshop, battery factory determine whether the battery is normal or not. It supports various battery standards and specifications, including CCA, DIN, IEC, EN, JIS, SAE and GB etc.
  • Page 26 Series User Manual 3. Tap to scan the barcode on the battery or manually input the code printed on the battery if necessary. Or tap Next Step to enter the next step. 4. Do appearance check of the battery or directly tap Next Step to ignore it.

  • Page 27: In-Car Inspection

    Series User Manual Note: Where the SOC and SOH indicates the State of Charge and State of Health respectively. 4.1.2 In-car Inspection In-car inspection indicates that the battery connects to loading devices, such as engine, etc. In this mode, the following tests can be done in a sequence of battery test, start test and charging test.
  • Page 28 Series User Manual including generator, rectifier, rectifier diode, etc. Through this test, we can know that the output voltage of the generator, the rectifier diode, and the charging current is normal or not respectively. 1. Connect one end of the included diagnostic cable to the DB15 diagnostic connector, and the other end to the vehicle’s DLC port.

  • Page 29: Attery Atching

    Series User Manual 13.3-15.5V for imported vehicles. The voltage varies with different car models, so you have to judge based on related vehicle models. In general, the DC voltage is stable, but it also varies with different revolution speed.

  • Page 30: Tpms (Only Applies To Ismarttool 601Tt & Ismarttool 601Max)

    Series User Manual 5 TPMS (only applies to iSmartTool 601TT & iSmartTool 601Max) This module provides the ability to activate most OEM/Universal TPMS sensors, reprogram sensor IDs, retrieve/clear TPMS DTCs and relearn sensors, helping technicians quickly find out faulty TPMS and turn off MILs.

  • Page 31: Program Tpms Sensor

    Series User Manual the tool alongside the valve stem. 2. If the TPMS sensor requires tire deflation (of the order of 10PSI), then deflate the tire and place the tool alongside the stem while tapping Active. 5.2 Program TPMS Sensor This function allows users to program the sensor data to the specific sensor and replace faulty sensor with low battery life or one that is not functioning.
  • Page 32 Series User Manual Note: If Auto is selected, the TPMS Relearn operation needs to be performed after programming all required sensors. Method 2 – Manual Create This function allows users to manually enter sensor ID. Users can enter the random ID or the original sensor ID, if it is available.

  • Page 33: Tpms Learning

    Series User Manual function, the tool will use the sensor information retrieved by the trigger function to program the sensor as default priority. 5.3 TPMS Learning This function is used to write the newly programmed sensor IDs into the vehicle’s ECU for sensor recognition.

  • Page 34: Maintenance

    Series User Manual 6 Maintenance This module provides an easy dial to quickly access the most commonly performed service functions as follows.  Oil Reset Service  Electronic Parking Brake Reset  Steering Angle Calibration  ABS Bleeding  TPMS (Tire Pressure Monitor System) Reset ...

  • Page 35: Steering Angle Calibration

    Series User Manual 2. The brake pad indicator lamp is on. 3. The brake pad sensor circuit is short, which is recovered. 4. The servo motor is replaced. 6.3 Steering Angle Calibration This function enables you to reset the steering angle, after replacing the steering...

  • Page 36: Injector Coding

    Series User Manual control keys to normally use the car. It needs to be performed in the following cases: When the ignition switch key, ignition switch, combined instrument panel, ECU, BCM, or remote control battery is replaced. 6.8 Injector Coding...

  • Page 37: Earbox Atching

    Series User Manual control the actions of regulating throttle (or idle engine) to adjust the amount of air intake. 6.12 Gearbox Matching This function enables you to complete the gearbox self-learning to improve gear shifting quality. It needs to be performed in the following cases: When the gearbox is disassembled or repaired.

  • Page 38: A/F Reset

    Series User Manual control panel. 6.21 A/F Reset This function is applied to set or learn Air/Fuel ratio parameters. 6.22 Coolant Bleed Use this function to activate the electronic water pump before venting the cooling system. 6.23 Transport Mode...

  • Page 39: Update

    Series User Manual 7 Update This module enables you to update the diagnostic software & App and frequently used software. 7.1 Update Diagnostic Software & APP Go to Update on the Job Menu to enter the update center. Tap Update to start downloading.

  • Page 40: Videoscope

    Series User Manual 8 Videoscope This module allows you to check those unseen parts of engine, fuel tank, braking system. It needs to work with the compatible Videoscope device (sold separately). For more details, please refer to the User Manual included with the module.
  • Page 41 Series User Manual 9.9 Settings It enables you to make some application settings and view software version information etc. 1. Units of Measurement It is designed to configure the measurement unit. Metric System and English System are available. 2. Shop Information This option lets you define your print information.
  • Page 42 Series User Manual 10 FAQ 1. How to save power? 1. Please turn off the screen while the tool keeps idle. 2. Set a shorter standby time. 3. Decrease the brightness of the screen. 4. If WLAN connection is not required, please turn it off.
  • Page 43 Series User Manual FCC Warnning: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference.
  • Page 44 Series User Manual ISED Warnning: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2)This device must accept any interference, including interference that may cause undesired operation of the device.
  • Page 45 Series User Manual Warranty THIS WARRANTY IS EXPRESSLY LIMITED TO PERSONS WHO PURCHASE SMARTSAFE PRODUCTS FOR PURPOSES OF RESALE OR USE IN THE ORDINARY COURSE OF THE BUYER’S BUSINESS. SMARTSAFE electronic product is warranted against defects in materials and workmanship for one year from date of delivery to the user.
  • Page 46 Series User Manual THANK YOU FOR CHOOSING SMARTSAFE! If you have any questions or comments please contact: SHENZHEN SMARTSAFE TECH CO.,LTD. Addr: 3F, Building B, Qiao’an Technology Industrial Park, Guanlan, Longhua New District, Shenzhen Zip: 518110 Tel: 86-755-89589916 http://www.newsmartsafe.com...

Table of Contents