Use Instructions - Sears SG60 Instruction Manual

Use Instructions

Power on and off the machine
Tap and hold the button for 3 seconds to power on the machine.
Then, the power indicator is on, and the vacuum cleaner enters the
standby state. Tap and hold the
off the machine.
Note: The main unit in the charging state cannot be powered off.
cleaning/Pause
Once the machine powers on, tap the
or use the controller or the smart APP to start cleaning.
Note:
·The machine cannot clean liquid.
·If the power is lower than 15%, the machine cannot work. Therefore, charge the
machine before cleaning.
·If the power is lower than 15% during cleaning, the machine will automatically
return back to the dock for charging.
·Before cleaning, tidy up all kinds of wires on the ground (including the power cord
of the dock). Otherwise, the machine may drag the wires while cleaning, which
may cause power failures of other electric appliance or damage items or wires.
button for 3 seconds to power
button on the main unit
Charging
Auto mode: After cleaning, the main unit automatically returns to
the dock for charging.
Manual mode: In the pause state, press the
"return for charging" mode or use the controller or the smart APP
for charging.
Virtual wall (optional)
The magnetic strip can be set to separate restricted zones (such as
washing rooms and kitchens).
Note: Fix the magnetic strip to the ground to avoid peeling off; otherwise affecting
the result of the visual wall.
button to activate the
Magnetic strip